HCl, or Hydrochloric Acid. You need an acid with Chlorine in it, and that's the most common one around, as well as the only one that I know of.
you end up with water (H2O) and Sodium chloride (table salt, NaCl)
Acid
Add concentrated solution of Hydro chloric acid to the solution of sodium hydroxide till mixture becomes neutral (checked by litmus) then heat the mixture , when a little amount of water is left allow to cool the mixture , the crystals of sodium chloride settelted down filter and dry the crystals.
Yes, when sodium hydroxide is added to hydrochloric acid, a neutralization reaction occurs to form water and sodium chloride (table salt). This reaction is highly exothermic and can generate heat, so it should be done carefully with proper safety precautions.
To make potassium chloride and water from potassium hydroxide, you would add hydrochloric acid (HCl). The reaction would be: KOH + HCl → KCl + H2O
A chemical reaction occurs between sodium hydroxide and hydrogen chloride. Adding more sodium hydroxide to the reaction causes it to speed up. If you add more of a reactant, such as sodium hydroxide, can it be considered a catalyst? Why or why not?
The products of the reaction between hydrochloric acid (HCl) and sodium hydroxide (NaOH) are water (H2O) and sodium chloride (NaCl), which is common table salt. This reaction is a neutralization reaction where an acid and a base react to form a salt and water.
Oleic acid can be saponified by reacting it with a strong base, such as sodium hydroxide or potassium hydroxide, in a process called saponification. This reaction results in the formation of the corresponding soap, which is the sodium or potassium salt of oleic acid, along with glycerol as a byproduct.
You would need to add Sulphuric acid to make Sodium Sulphate + Water :)
Sodium react with water forming a base - sodium hydroxide - and releasing hydrogen. Add an acid for neutralization.
To neutralize the sulfuric acid completely, you need a 1:2 molar ratio of sodium hydroxide to sulfuric acid. Therefore, you would need to add twice the amount of sodium hydroxide compared to the amount of sulfuric acid, which is 40.0 mL of the sodium hydroxide solution.
2NaOH + H2SO4 --> Na2SO4 + 2H2O Looks like sodium hydroxide works here. Products are a salt, sodium sulfate and water.