Eye goggle and matches and a chair
You need safety goggles
NOTHING
Safety flame medium flame roaring flam
Yes, to achieve a safety flame with a Bunsen burner, you should turn the air hole fully closed. This creates a yellow, luminous flame known as the safety flame, which is cooler and more visible. When you’re ready to use the burner for experiments, you can then gradually open the air hole to adjust to a blue, hotter flame for optimal performance.
Robert Bunsen, the German chemist after whom the Bunsen burner is named, did not have a specific laboratory accident associated with him that is widely documented. However, he did suffer injuries from various experiments throughout his career, including burns from chemicals and explosions. His work in the laboratory emphasized safety and efficiency, leading to the development of the Bunsen burner, which allowed for better control of heat during experiments.
As a safety flame, keep it on this if the burner is not in use :)
The safety flame on a Bunsen burner is used when the burner is not in use to prevent accidental fires. It is a small, non-luminous flame that burns with a blue color and is created by adjusting the air hole on the burner.
You need safety goggles
The hole on a Bunsen burner should be closed to create a safety flame. This flame is smaller and more controlled, reducing the risk of accidents.
The flame on a Bunsen burner should be blue when not in use. If the flame is yellow, it may indicate a problem with the burner, such as not enough air mixing with the gas, which can be a safety hazard.
When you have to leave your Bunsen burner but need to keep it alight.
The Bunsen burner may have been turned off to prevent a fire hazard once it was no longer needed or to conserve fuel. It is a safety precaution to always turn off the Bunsen burner when not in use.
It is important to always ensure that the bunsen burner flame is turned off when not in use to prevent accidents and fires. Additionally, make sure that the bunsen burner is securely positioned on a heat-resistant surface and that there are no flammable materials nearby to prevent potential hazards.
The base of a Bunsen burner is usually broad and heavy to provide stability and prevent it from tipping over during use. This helps ensure the safety of the person using the Bunsen burner and prevents accidents.
you would use the safety flame when not heating anything because the blue flame is for heating because its hotter than yellow.
The blue flame of the Bunsen burner is when it is hottest. The yellow flame is the safety flame. you should always start the burner on the safety flame which is produced when the holes on its base are closed.
NOTHING