By getting a magnet and hovering it over your skin or whatever it is stuck to.
I hope I helped you !
the correct answer would be -( magnetic attraction of one part )
The profile of the iron filings reflects that of the magnetic field. When the magnetic field is strong, the lines will be really tight (small separation) and thick (height and width). =========================
Hold a magnet over it and the iron will fly out of the salt and stick to it, and the salt will stay there.
Well, darling, to separate iron filings from powdered sugar, you can use a magnet to attract the iron filings since sugar isn't magnetic. Just wave that magnet around like you're casting a spell and watch those pesky iron bits cling to it. Voila! Separated faster than you can say "sweet tooth."
Yes. I can be done using iron filings and a clear piece of plastic. Pour on the iron filings, put on the plastic, and then the magnet. The iron filings should form the shape of the magnetic field around it. If that does not work, here is a link to a picture... http://www.fi.edu/htlc/teachers/lettieri/magneticfields.jpg Hope that helps.
If they are iron filings, you can use the property of magnetism to remove the iron filings using a magnet. You will need to rinse the iron filings with water after you remove them with the magnet in order to completely remove the sawdust from them.
One way to physically remove iron filings from sand is to use a magnet. Pass the magnet over the mixture to attract the iron filings, leaving the sand behind. Alternatively, you could use a sieve to separate the larger iron filings from the smaller sand particles.
To separate a mixture of sand, iron filings, and salt, you can use a magnet to remove the iron filings, then dissolve the salt in water and filter the sand out. Lastly, evaporate the water to obtain the salt.
Use a magnet to remove the iron filings. Filter the remainder to separate the insoluble chalk powder from the water. Wash and dry the iron filings as they will be contaminated. Dry the chalk powder to remove traces of water.
Yes, iron filings are magnetic.
Copper filings are not attracted to a magnet, as iron filings are.
evaporate the watercrush the clay-iron mixture to powderuse a magnet to remove the iron from the clay
First, place the sulfur, sand and iron filings in a plastic container. Next, use a magnet to remove the iron filings from the sulfur-sand mixture and surely,the iron filings will connect to the magnet, leaving the sulfur and sand behind.
A magnet can be used to separate iron filings from sulfur as iron is magnetic whereas sulfur is not. Simply pass a magnet over the mixture to attract and remove the iron filings, leaving the sulfur behind.
Yes, a magnet would remove the iron filings without attracting the copper salts, copper salts are not magnetic.
Use a magnet to remove the iron filings. The add water to dissolve the salt, and the aluminum filings will settle to the bottom of the container. Pour that salt water into a pan, heat it and evaporate the water, leaving the salt in the pan.
One method to separate iron filings and sulfur is to use a magnet. The iron filings are attracted to the magnet and can be easily separated from the sulfur. This method takes advantage of the magnetic properties of iron filings.