That all depends on how many square inches you have, to which to apply the pressure, my boy.
If you can only press on one square inch, then you must concentrate the entire 10 stone of weight onto that one meager square inch.
If on the other hand, you can spread the weight of the 10 stone over an entire Rugby field, then you shan't require much force indeed on each square inch of it, now do you ?
Whatever the area you have available, the upward force on the entire area must add up to 10 stone. The more area you have, the more thinly you can spread that total force. The amount of force on each square inch is the pressure.
Now be off with you; go study your lessons.
The average "weight" of air is about 14 2/3 pounds per square inch. If you had some square "straw", one inch in a side, that reached upwards from sea level to the edge of space, and sat it on a scale (adjust for the weight of the straw!), the column of air - about 90 miles high - would weigh 14 2/3 pounds.
An atmosphere is sometimes used as a unit of pressure, meaning approximately 15 pounds per square inch. When a diver descends, the weight of the water above him exerts pressure on his body. At a depth of approximately 32 feet, the weight of the water will amount to 15 pounds per square inch, or one additional atmosphere. So three atmospheres means the diver is experiencing 45 pounds per square inch on his body at a depth of about 64 feet.
It depends on how deep you go, but can be up to 18,000 psi but you need to be at lest 10km down for that.
The lb (Pound) is a unit of mass (sometimes called weight) and the psi (pounds per square inch) is a unit of pressure. I take it that you need to calculate the pressure of a number of pounds on a certain surface. You may find the suggested web site helpful. You can't convert pounds to pounds per square inch (psi). One is force and one is pressure. If you know the area over which the force is spread, then you can divide the force by the area and get pounds per square inch (psi).
Pounds per square inch.
14.7 pounds per square inch
The "p" in "psi" is pounds. If you are asking what weight would produce a pressure of 560 pounds per square inch, then it depends on what area that weight is on. A 560 pound weight on an area of 1 square inch would produce a pressure of 560 psi A 1120 pound weight on an area of 2 square inches would also produce a pressure of 560 psi.
14.7 pounds per square inch at sea level.
250 pounds per square inch (PSI)
it's about 7 and half stone or 106 pounds
1,348.85 pounds per square inch.
They are not the same. Pounds is a measurement of weight. Square Feet is a measurement of Area. Some references to "pounds" really is meant to be "pounds per Square inch" which is a measurement of Pressure (or force). Maybe you mean converting "pounds per square inch" to "pounds per square feet"?? You need to be more specific and check your facts of the problem.
You cannot convert gallons per minute to pounds per square inch. The quantities do not have the same meaning. Gallons are a measure of volume, and pounds are a measure of weight. Minutes are a measure of time, and square inches are a measure of area.
roughly 14.6 pounds
You take the weight of the tank and divide it by the number of square inches that touch the floor. If you have a 400 pound tank sitting on a stand with four legs of 1 square inch each, the tank would be exerting 100 pounds per square inch. If the same tank is setting on the floor and has a footprint of 10 inches by 20 inches, it would be 2 pounds per square inch.
350 kilopascals = 50.76 pounds per square inch.
Kilograms per square meter x 0.001422 equals pounds per square inch.