0
Fin pitch refers to the spacing between the fins of a finned heat exchanger. It is often confused as a measure of the fin density which is expressed in terms of fins per inch (FPI). Fin pitch is measured from the centerline of one fin to another and can be determined from summing the fin spacing (distance between fins) and the fin thickness. Generally speaking, smaller fin pitches result in more dense fin arrays which can remove more heat. A point of diminishing returns exists in which the heat exchanger is too dense resulting in insufficient flow of the cooling fluid between fins.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
What is caloric temperature?
it is like an average temperature where uses for design heat exchanger
How do Gas Fireplaces work to heat homes?
In additional to radiating heat into the room many gas fireplaces have a heat exchanger- cool air is drawn into the shell around the firebox, and warmed air comes out of the vents at the top.
Is there a difference between a desuperheater and an attemperator?
A desuper heater is for low and medium pressure and temperature application as required in process plants. Attemperator covers all the range depending on the steaming parameters of the boiler. In functioning, they are both the same i.e. they remove the superheat of the steam with help of water either by direct contact with spray or by indirect contact in a heat exchanger.
What property describes how HIGH or LOW a sound seems to a person?
pitch
What way does a sundials fin have to go?
The "fin"is actually called the Gnomon. Its alignment in azimuth on a horizontal dial is N-S, or vertical on a wall-mounted dial, andit tapers into the dial Northwards or upwards respectively;but its angle is calculated from the angle of latitude in which the instrument is to be placed.
Types of heat exchanger?
list of heat exchangersshell and tubepipe in pipe (double pipe )floating headagitated filmplate and frameextended surface (fin type)scrapped surfaceblock type
Heat exchanger for ammonia absorption refrigeration system?
there are two type of heat exchanger in absorption refrigeration, first is liquid heat exchanger and other is gas heat exchanger.both heat exchanger function is same, to transfer heat (hot medium to cold medium) without violate second newton law of thermodynamics. liquids heat exchanger is between boiler and absorber vessel mean while gas heat exchanger between evaporator and absorber.
Exchanger is not transfer heat why?
Heat exchanger manufacturers is an ISO 9001 certified company located in Coimbatore, Tamilnadu. The company started its functioning 2011 in, with a strong background in heat exchanger manufacturing. Our well-experienced and dedicated employees consistently thrive to serve our customers with the best heat exchanger solution. visit :: heatexchangersmanufacturers.in
What is heat exchanger duty?
The duty of a heat exchanger can be defined in an easy way as "The amount of heat exchanged from a fluid at a higher temperature to the fluid at lower temperature in unit time by a heat exchanger is called its duty"
Difference between heat exchanger and condenser?
actually there is no difference , infact condenser itself is a heat exchanger
What type of exchanger is used to condense a vapor by cooling it?
A heat exchanger.
What is the difference between a calorifer and a heat exchanger?
Calorifer is a heat exchanger, with a specific of air (or other gas) preheat. Usually is directly in a Duct installed. Heat Exchanger usually is separate unit.
Why Expansion bellows are required in heat exchanger?
expension belows are used for heat exchanger to avoid thermal stress
What is difference between condenser and heat exchanger?
A heat exchanger is a device that transfers heat from one fluid to the others. A condenser is simply a heat exchanger. It compresses refrigerants into a hot gas to then condense them into a liquid. Majorly condenser is used to cool the required vapor and heat exchanger is used to heat the required liquid.
What is the abbreviation for heat exchanger?
hx
Where is the dollar plate on a heat exchanger?
It's the flat, flanged cover on the front (and sometimes the rear) of a shell & tube heat exchanger.
How you can increase the retention time in shell and tube heat exchanger?
the most effective way to do so is to reduce the flow of the heat exchanger
