1 gallon of water =~ 8.345 lbs
2000 lbs / 8.345 lbs/gal = 239.65 gal
In the US, about 239.65 US gallons would equal a ton.
Imperial gallons (metric):
1 tonne = 1000 kg.
1 gallon of water =~ 4.54609 kg
1000 kg / 4.54609 kg/gal = 219.97 gal
In the metric system, about 219.97 imperial gallonsequals a ton.
depends on what you have gallons of...a gallon of water weighs 8lbs.
in that instance 276 gallons equal a tonne (2204.62 lbs).
how do you determine how many galons are in a cubic meter of water
yes
there are 2000pounds a ton.
yes it dosen't matter what size it could be any size diaper and still absorb the same amount of water
That question cannot be answered, because you ask for a length or distance unit in yards and than for weight in metric tonnes. Length and weight does not go together. Sand is so very different as a naturally occurring granular material of finely divided rock and mineral particles. Sand particles range in from 0.0625, or 1⁄16 mm to 2 millimeters in diameter. An individual particle in this range size is termed a sand grain. The next smaller size class is silt, that are particles smaller than 0.0625 mm and down to 0.004 mm in diameter. The specific weight, also known as the unit weight, is the weight per unit volume of a material. The density of the material, mass per unit volume, is measured in kg/m3. You have to know many more parameters. Is the sand wet or dry. What is the weight of the water in it? Even if you meant "cubic" yards, the calculation of a weight cannot work. The question: "How many cubic yards of pure water make a metric tonne?" is easy to answer.
Any barge which displaces more than one ton of water (and allowing for appropriate freeboard) will safely carry a one ton weight.
1.5 ton evaporator
Five ton
The answer would depend on the size of the ton - there are two weights for a ton.
A ton of rocks weighs more. Since they both weigh a ton, then they weigh the same.
The size of room is enough wich is suitable for capacity of 1.5 Ton A/C The size of room is enough wich is suitable for capacity of 1.5 Ton A/C
1 ton of feathers, 1 ton of coal, 1 ton of water, etc.
It would take 1 ton of water to create 1 ton of steam.
a cubic ton
The weight of water displaced by a one ton ship would be one ton, as it experiences a buoyant force equal to the weight of the water it displaces (Archimedes' Principle).
The number of cubes that make up 1 ton depends on the size of the cubes and the material they are made from. For instance, if we consider a standard cubic meter of water, which weighs about 1 ton, then there would be one cubic meter of water in a ton. If the cubes are smaller or made of a denser material, the number would vary accordingly. To provide a precise answer, you need to specify the dimensions and density of the cubes.
The number of steel rods in a ton will depend on the size and diameter of the rods. Typically, a ton of steel rods can range from around 540 to 650 rods, assuming they are standard size and weight.