Not a lot, water and oil don't mix and so the oil will float on top of the water.
Warm water is NOT a disinfectant. It makes grease and oil more soluble in water and also is a little bit more comfortable to wash with.
It will die. I am pretty sure.
Hydrophobic (water repulsive) regions. Form emulsions when mixed with aqeous compounds (ie. classic oil & water example)
Oil has a lower density than vinegar. When oil and vinegar are mixed, the oil rises, or floats to the top.
If it's something like grease, it could start fire.
If you let the oil and water sit for a while, you can actually see the two separate. It's quite cool.
Check the oil on your dipstick. If the engine is warm, the oil level will be high and look milky or light brownish. If the engine is cold, the oil level will be high and you will be able to see water droplets on the end of the dipstick. If the oil is mixed with the water it will be grey. If not the water will be at the bottom.
Check the oil on your dipstick. If the engine is warm, the oil level will be high and look milky or light brownish. If the engine is cold, the oil level will be high and you will be able to see water droplets on the end of the dipstick. If the oil is mixed with the water it will be grey. If not the water will be at the bottom.
they will separate
if you were to add water an ice cube an olive oil the water would be on the bottom and the oil would be on top and the ice cube wuld float inside of the olive oil.
Water and oil can be naturally mixed together through a process called emulsification, where small droplets of one substance are dispersed throughout the other substance. This can happen when a substance called an emulsifier is present, which helps to stabilize the mixture and prevent the oil and water from separating.
Water is heavier than oil. Oil floats on water.
oil
Oil and water can be effectively mixed in cosmetics by using emulsifiers. Emulsifiers are molecules that have both hydrophilic (water-attracting) and lipophilic (oil-attracting) properties, allowing them to bind oil and water together. This creates a stable mixture in which the oil and water do not separate.
When oil and water are mixed together, the oil rises to the top because it is less dense than water. Oil and water do not mix well due to differences in their chemical properties, resulting in the oil forming a separate layer on top of the water.
Water mixed with oil? Oil mixed with water? White smoke out of tailpipe? Lack of compression on 2 adjacient cylinders?
Because of different densities; being density of oil lower than water density, this makes oil float on water