First you lay out all the tiles with spacers adhering them to the floor, then you grout between by scraping across surface of tiles. Then just wipe clean. The grout is like a concrete mix & will harden.
Ceramic tiles have a grout "gap" but vinyl tiles shouldn't have a gap.
Most often, sanded grout is used for floor tiles because the grout lines are usually greater than 1/8" wide. Sanded grout is necessary for the wider lines to give added strength, and to keep your grout from cracking and chipping out. Unsanded grout must be used if your grout lines are narrower than 1/8", because the grains of sand in sanded grout could cause air pockets and prevent good adhesion to your tiles - and it will crack and chip out as well. Sanded and unsanded grouts are cement-based. One alternative grout on the market is epoxy-based. It is neither sanded nor unsanded, but will work fine in either narrow or wider grout lines. If your grout lines are wider than 1/2", or if you are using saltillo tiles, you must use saltillo grout. Other grouts will not handle this wider width.
Using sanded grout instead of tile mortar can lead to several issues. Sanded grout is designed for filling joints between tiles rather than adhering tiles to a substrate, which can result in poor bond strength and instability of the tiles. This may cause tiles to crack, shift, or come loose over time. It's essential to use the appropriate materials for their intended purposes to ensure a durable and long-lasting installation.
Tiles used on floors tend to be thicker than wall tiles. Also, floor tiles are subjected to flexing as people walk over them. Therefore, if floor tiling a wooden floor, use a flexible cement adhesive and grout designed to give and take without cracking.
If you mean in between, yes. Mirrored tiles are usually held in place with an adhesive like liquid nails in areas where waterproofing is not a concern. Glass cubes are used for showers with a clear sealer in between
The best grout removal tool for removing old grout from tiles is a grout saw or an oscillating multi-tool with a grout removal attachment. These tools are effective in removing grout without damaging the tiles.
Glass tiles are surprisingly tough, at least as impact resistant as many ceramic tiles. They are easy to clean, but the most common reason for using glass tiles in a design is the wide range of vibrant colors. On the downside, they are generally smaller, which means more grout lines, which can be difficult to clean.
To effectively remove grout from your tiles, you can use a grout saw or a grout removal tool to carefully scrape out the old grout. Be sure to work slowly and methodically to avoid damaging the tiles. After removing the grout, clean the area thoroughly with a damp cloth to remove any remaining debris.
To effectively remove grout from tiles, you can use a grout saw or a grout removal tool to carefully scrape out the old grout. Be sure to work slowly and methodically to avoid damaging the tiles. After removing the grout, clean the area thoroughly with a damp sponge to remove any remaining residue.
To remove grout effectively from tiles, you can use a grout saw or a grout removal tool to carefully scrape away the old grout. Be sure to work slowly and methodically to avoid damaging the tiles. After removing the grout, clean the area thoroughly with a grout cleaner and a scrub brush to ensure a clean surface for regrouting or sealing.
clear or frosted glass that you use in lieu of a window. they are stacked with grout in between and are a decorative alternative to windows
To effectively remove dry grout from tiles, you can use a grout saw or a grout removal tool to carefully scrape away the dried grout. Be sure to work slowly and gently to avoid damaging the tiles. After removing the grout, clean the area with a damp sponge to remove any remaining residue.
To effectively remove old grout from tiles, you can use a grout saw or a grout removal tool to carefully scrape away the old grout. Be sure to work slowly and methodically to avoid damaging the tiles. After removing the old grout, clean the area thoroughly with a grout cleaner and a scrub brush to ensure a clean surface for regrouting.
Grout.
I have a lot of mould around my bathroom tiles and don't seem to be able to get it out from the grout in between. What grout cleaner will work best for this?
Grout should usually be white or contrast with the tiles, but it truly depends on your preferences.