To a degree, but if you are concerned use lacquer thinner.
Lacquer thinner has no sheen. It will thin any lacquer or enamel and imparts no gloss or change of that nature.
I would first scrape it with a spatula or edge made from harder wood. Then get the remainder with acetone or lacquer thinner.
Lacquer thinner will remove it, then the stainless should be wiped completely dry of any residue.
The solvent for varnish is lacquer thinner, but I cannot speak to what the lacquer thinner might do to the woolen item.
The density of lacquer thinner typically ranges from 0.75 to 0.85 grams per milliliter, depending on the specific formulation.
Yes, lacquer thinner has the ability to dissolve and melt certain types of plastic materials.
It depends on the type of ceramic adhesive. Many of them can be taken off tile with lacquer thinner on a rag.
Yes, you can use a lacquer thinner on carbon fiber. However, when doing so, make sure you water the thinner down first or add it to a solvent.
Lacquer thinner will possibly remove it, chemical stripper will definitely remove it.
Lacquer thinner evaporates quicker. It is cleaner or leaves less of a film than paint thinner. Lacquer thinner will thin most solvent based paint but paint thinner shouldn't be used to thin Lacquer. Lacquer dries from the surface painted out and enammal dries from the surface of the paint down to the surface painted. Using the wrong thinner affects how the paint dries and may affect the final finish.
Lacquer thinner.