0
What else can I help you with?
A circuit with a lagging current means the circuit is?
Inductive. Voltage (E) leads current (I) in an inductive (L) circuit and current (I) leads voltage (E) in a capacitive (C) circuit. (ELI the ICEman)
What is the relationship between the current and the components in a purely capacitive circuit?
In a purely capacitive circuit, the current and the components have a relationship where the current leads the voltage by 90 degrees. This means that the current and voltage are out of phase in a purely capacitive circuit.
What types of loads have a leading power factor?
Capacitive loads have a leading power factor. Current leads voltage when there is capacitive reactance. (The opposite is inductive, which is lagging.)
What lagging or leading?
You must knew there's a sinusoidal wave form for both voltage nd current. That wave form is drawn between voltage/current nd phase angle. Unity: phase angle of voltage nd current matches, irrespective of magnitude leading: phase angle of current leads voltage by an angle lagging: phase angle of voltage leads current or current lags voltage by an angleAnswerThe terms, 'leading' and 'lagging' apply to a.c. loads. 'Leading' means that the load current leads the supply voltage, whereas 'lagging' means that the load current lags the supply voltage. 'Leading' currents occur in capacitive loads, whereas 'lagging' currents occur in inductive loads.'Leading' and 'lagging' refers to what the current is doing, relative to the voltage, never the other way around.
What is a career progression?
i dont no wat it means tbh
What is the phase relationship of voltage across a capacitor and current though the capacitor?
In a capacitor, the current LEADS the voltage by 90 degrees, or to put it the other way, the voltage LAGS the current by 90 degrees. This is because the current in a capacitor depends on the RATE OF CHANGE in voltage across it, and the greatest rate of change is when the voltage is passing through zero (the sine-wave is at its steepest). So current will peak when the voltage is zero, and will be zero when the rate of change of voltage is zero - at the peak of the voltage waveform, when the waveform has stopped rising, and is about to start falling towards zero.
What is the typical chord progression used in a blues scale chord progression?
The typical chord progression used in a blues scale chord progression is the I-IV-V progression. This means the chords used are the I chord, the IV chord, and the V chord in the key of the blues scale being played.
What is sending voltage?
sending voltage means voltage applied to source side.....
What does palliative?
Palliative means "minimizing the progression of a disease", as distinct from attempting to cure it.
What is DC in voltage means?
This means direct current.
If voltage is zero so will current be happened?
No voltage means no current can flow.
What does palliative mean?
Palliative means "minimizing the progression of a disease", as distinct from attempting to cure it.
