answersLogoWhite

0

What else can I help you with?

Related Questions

How do you change battery suzuki gsxr 750?

Most late GSXR750 have the battery under the front seat.


How do you change a front sprocket on a CR85?

Find a website that specializes in MX.


How do you Changing front drive sprocket on polaris 300 xplorer?

To change the front drive sprocket on a Polaris 300 Xplorer, first, ensure the ATV is secure and on a level surface. Remove the front wheel and brake caliper to access the sprocket. Use a socket wrench to remove the retaining nut and pull off the old sprocket. Install the new sprocket, reassemble the components in reverse order, and double-check all fasteners for tightness.


When your in low gear what sprocket are you using?

It depends on whether you are talking about the front sprocket (the one at the pedals, called a chainring) or the sprocket at the rear derailleur. The lowest gear at the front is the smallest sprocket/chainring. The lowest gear at the rear is the largest sprocket. So if you combine the smallest sprocket at the front with the largest sprocket in the rear you have the lowest gear available on your bike.


How do you remove the front sprocket from your Honda TRX 250R ATV?

How do you remove the front sprocket from Honda trx 250r


Where is the oil pump on a 2004 Chrysler PT Cruiser?

Under the timing belt sprocket, on the front of the crankshaft.Under the timing belt sprocket, on the front of the crankshaft.


How to Change a front sprocket?

To change a front sprocket, first ensure the motorcycle is on a stable stand and remove any necessary bodywork for access. Loosen the chain and remove the chain from the sprocket, then use a socket wrench to remove the retaining bolt or nut holding the sprocket in place. Replace the old sprocket with the new one, ensuring it's oriented correctly, and then reassemble by tightening the bolt and reattaching the chain. Finally, adjust the chain tension as needed and check for proper alignment before taking the bike for a test ride.


What is the best sprocket for Yamaha crypton s?

The best sprocket for the Yamaha Crypton S typically depends on your riding style and needs. Many riders prefer a 14-tooth front sprocket paired with a 40-tooth rear sprocket for a good balance of acceleration and top speed. However, if you're looking for improved acceleration, you might consider a smaller front sprocket or a larger rear sprocket. Always ensure compatibility and consider your specific riding conditions before making a change.


When two people are on a tandem bike can they peddle at different speeds than each other?

No. The two chainrings are linked together with one chain. The chainring of the second person actually drives the rear sprocket, but since there's a chain that links up that person's sprocket with the one in front, both parties must pedal at the same speed. I suppose it would be possible to use a larger or smaller sprocket in the front to accomplish this. one could also use a 2 speed sprocket with a tensioner to change the ratio of the front sprocket with respect to the rear.


Does a bigger sprocket give higher top speed?

A bigger front sprocket gives a higher top speed. A bigger rear sprocket gives a lower top speed. A bigger front sprocket is less torque more top speed, and a bigger rear sprocket is more torque less top speed.


Can you drop two teeth on the front sprocket of a Yamaha fz6r?

Yes, you can drop two teeth on the front sprocket of a Yamaha FZ6R. This change will effectively increase acceleration and improve throttle response, as it lowers the gearing. However, it may reduce top speed and affect fuel efficiency. It's important to consider your riding style and how the change aligns with your performance goals.


How do you increase the speed of a motorcycle?

You can change the chain sprockets of most motorcycles to get a higher top speed. Reduce the rear sprocket numerically, and/or increase the front sprocket numerically. A higher profile tire will also increase top speed slightly.