answersLogoWhite

0

What else can I help you with?

Related Questions

What is iso vg 46 hydraulic oil?

vg stands for viscosity grade. Hydrualic oil comes in many grades.


What happen if you use hydraulic oil iso vg 46 instead of hydraulic oil iso vg 32?

i made this mistake on an hydraulic breaker pack,no damage was caused to the pump or breaker.however the operation of the equipment was sluggish until the machine really warmed up.presumably because the 46 oil is" thicker" than the iso 32


Brand new Volvo excavator model ew180b you are in a country that does not carry iso vg 46 and can only get iso vg68 can i mix the two oils?

sure you can...both are oils no..yoou can...!


What is the density of ISO VG 68?

ISO VG 68 has a density of approximately 0.878 grams per cubic centimeter at 15 degrees Celsius.


Density of ISO VG 46 oil at 58.5C and 45C?

The density of ISO VG 46 oil at 58.5ºC is typically around 0.801 g/cm^3. At 45ºC, the density is slightly higher, usually around 0.807 g/cm^3. Temperature affects the density of oil, with lower temperatures generally resulting in higher density due to the reduction in thermal expansion.


What are the equivalent oil lubricant for ISO VG 220?

Equivalent d 'huile iso vc 150/220


What is ISO VG oil?

ISO VG oil refers to a classification of lubricating oils based on their viscosity grade, as defined by the International Organization for Standardization (ISO). The "VG" stands for "Viscosity Grade," and the number indicates the oil's kinematic viscosity at 40°C, with higher numbers representing thicker oils. ISO VG oils are commonly used in various industrial applications, including hydraulic systems and machinery, where specific viscosity requirements are essential for optimal performance and protection.


What oil type for Case CX160?

For the Case CX160 excavator, it is recommended to use hydraulic oil that meets the specifications of API CF or better. Commonly used oil types include ISO VG 46 or ISO VG 68 hydraulic fluids, depending on the operating temperature and conditions. Always consult the operator's manual for specific oil type recommendations and service intervals to ensure optimal performance and longevity of the machine.


What is the dielectric constant for servo prime 46 lube oil?

ISO-VG 46 oil is a synthetic polyalkenglycol (PAG) oil, therefore the dielectric constant is 6.6-7.3. Please confirm the oil type of Servo Prime 46 lube oil see the chart in the related links section. Servo Prime 46 is an ISO-vg46 oil made by Indian Oil Corporation Limited (IOCL). It is also available from these manufacturers: BPCL (hydrol 46) Castrol (Hyspin AWS 46) ExxonMobil Co. India Pvt. Ltd. (MObil DTE Medium) Shell (Shell Turbo Oil T46)


Is iso and aw hydraulic 46 the same?

ISO 46 and AW 46 refer to hydraulic fluids with a viscosity grade of 46 centistokes at 40°C, but they are not exactly the same. ISO 46 is a designation under the International Organization for Standardization (ISO) that specifies the viscosity grade, while AW (Anti-Wear) 46 indicates that the fluid contains anti-wear additives, making it suitable for hydraulic systems. While both may have similar viscosities, the AW designation specifies additional performance characteristics related to wear protection.


What does ISO 46 mean on Hydraulic oil?

ISO 46 refers to the viscosity grade of hydraulic oil as defined by the International Organization for Standardization (ISO). The number 46 indicates the oil's kinematic viscosity at 40°C, which is approximately 46 centistokes (cSt). This viscosity level is suitable for various hydraulic systems, providing adequate lubrication and performance under moderate temperatures and pressures. ISO viscosity grades help ensure compatibility and effective operation in hydraulic machinery.


What oil does a Nissan forklift take?

Nissan forklifts typically use hydraulic oil that meets the ISO VG 32 or ISO VG 46 specifications. It's important to check the specific model's manual for the recommended oil type, as some models may also require specialized hydraulic fluids. Additionally, using the correct oil ensures optimal performance and longevity of the forklift’s hydraulic system. Always consult the manufacturer's guidelines for the best results.