0
What else can I help you with?
What is the difference between 14 point card stock and 80 pound card stock?
8 pt approximates to 66 lb cover, or card stock 10 pt approximates to 80 lb cover 12 pt approximates to 92 lb cover and so on... so to answer your question, the difference is that they are different stock. 14 pt is heavier than 80 lb.
Why the mild steel have two yield points?
Low carbon steels suffer from yield-point runout where the material has two yield points. The first yield point (or upper yield point) is higher than the second and the yield drops dramatically after the upper yield point. If a low carbon steel is only stressed to some point between the upper and lower yield point then the surface may develop Lüder bands.
What is the melting point of gilding metal?
The melting point of gilding metal is between 427 and 788 degrees Celsius. Gilding metal is an alloy that is comprised of 95 percent copper and 5 percent zinc.
Why you use minus to zero range in drum level transmitter?
I refer to Steam Boiler drum level. It is actually - to some positive figure is the range. Generally the boiler level is maintained at mid point that is zero. The transmistter is differential type. (DP type) If the transmitter is with a specified signal out put of 4-20 mA, it sends out 4 mA at lowest level and 20 mA at highest level. At mid level zero it sends out 12 mA. Differential pressure is highest at actual lowest level and lowest at actual highest level of the drum. By keeping negative to positive range there is fair amount of analog signal on lower and higher side of the drum.
What is difference between continuous and continual improvement in quality management system?
Continuous improvement means, regular or unbroken series or pattern or you can say, prolonged without interruption. On the other side, continual improvement consists to frequent changes, but steady.. One thing I would like to mention here, those organizations who keep focus on continuous improvement in quality management are usually try to over manage the things, which could be turn out in the disaster. But this is just form my personal point of view.
What is the difference between re-order levels and re-order quantity?
) Reorder Level - Maximum Consumption x Reorder Period Reorder Period = is the amount of time from the point at which you determine the need to order to the point at which the inventory is on hand and available for use But Re Reorder Quantity is - How much quantity to be ordered when stock reached below reorder level - Anurag
What is reorder level system?
A reorder level system is a method used in inventory management to determine the point at which new inventory should be ordered. It calculates the reorder level by considering factors such as lead time, demand rate, and safety stock to ensure that sufficient stock is available to meet customer demand while minimizing excess inventory. When the current inventory level drops to the reorder level, a new order is triggered to replenish stock.
What is reorder point?
The reorder point indicates when to place an order. The reorder point is calculated by 1) estimating the sales in the near future, 2) estimating the number of days between ordering and receiving the additional units, and 3) the number of units of safety stock. Check Ordering online
How do you calculate reorder level for quantity?
re-order point/level = daily demand * lead time= (Annual Demend/Operation Day) * lead time
How is reorder point determined?
The reorder point is determined by considering the lead time for replenishment, the average demand during that lead time, and the desired service level to avoid stockouts. It is typically calculated as the product of the lead time demand and the lead time, with adjustments made for variability in demand and lead time. The reorder point helps ensure that the right amount of inventory is ordered at the right time to meet customer demand while minimizing stockouts.
What does ROP mean in inventory?
ROP Stands for ReOrder Point
What is the difference between insertion point and cursor?
What is the deference between Insertion Point and Pointers?
What is the difference between Aniline Point and Mixed Aniline Point?
There is no any such difference between Aniline point and mixed Aniline point . . . . .
What is the difference between relief and elevation on a physical map?
Relief is the difference between high and low elevationElevation is the the height above sea level of a point on Earth's surface.by` Lora Sukiasyan
Conclusion of slump test?
The difference in level between the height of the mould and that of the highest point of the subsided concrete is measured. This difference in height in mm. is taken as Slump of Concrete.
What is the difference between an initial point of a vector and a terminal point?
The difference is the length of the vector.
Which state is America's flattest with a difference of only 345 feet between its highest and lowest points?
Florida is the flattest state in America, with a difference of only 345 feet between its highest point (345 feet) and lowest point (sea level).く
