You need to figure in resistance also. The formula is I=E/R. Current (I) = Voltage (E) divided by Resistance (R). At the same resistance, if voltage goes up, so does current.
Alternative AnswerThe ratio of voltage (U) to current (I) is called 'resistance', i.e: R = U/I. If this ratio is constant for variations in voltage, then the circuit is said to be 'linear' or 'ohmic', and obeys Ohm's Law. If the ratio changes for variations in voltage, then the circuit is said to be 'non-linear' or 'non-ohmic', and the circuit does not obey Ohm's Law. As most circuits are non-linear, it is clear that Ohm's Law is not a universal law.
Ohm's law gives the relationship between current, voltage, and resistance. The law states that I=V/R, where I is current, V is voltage, and R is resistance. Source: university digital fundamentals
That is called Ohm's Law.
The unit of power is watts, the unit of current is amps, and the unit of voltage it volts. Power = Voltage X Current Voltage = Power / Current Current = Power / Voltage In electricity, power is symbolized with a P, current with an I, and voltage with a V. The real formula looks like: P = V x I V = P / I I = P / V
Because V = I x R or Voltage = Current x Resistance. Since resistance is linear there is a linear relationship between Current and voltage. If you have DC voltage you have DC current and if you have AC Voltage you have AC current. Note that there is a linguistic recognition of this relationship in that the voltage is described in terms of the current.
Voltage is the product of current times resistance, V=IR, I is Current and R is resistance. ANSWER: It is a simple ratio of 1:1:1
In the graph of voltage vs current, the relationship between voltage and current is linear. This means that as voltage increases, current also increases proportionally.
because current is the ratio of voltage and resistance.
The current vs voltage graph shows that there is a linear relationship between current and voltage in the given circuit. This means that as voltage increases, the current also increases proportionally.
In a pure inductive circuit, the relationship between current and voltage is such that the current lags behind the voltage by a phase angle of 90 degrees. This means that the current and voltage are out of phase with each other, with the current reaching its peak value after the voltage has reached its peak value.
Ohm's law gives the relationship between current, voltage, and resistance. The law states that I=V/R, where I is current, V is voltage, and R is resistance. Source: university digital fundamentals
The relationship between power, voltage, and current can be expressed mathematically using the formula: Power Voltage x Current. This formula shows that power is directly proportional to both voltage and current. In other words, an increase in either voltage or current will result in an increase in power.
According to ohms law I=V/R; So current is directly proportional to voltage
In an electrical circuit, power is the product of current (the flow of electric charge) and voltage (the force that drives the current). The relationship between power, current, and voltage is described by the equation P I x V, where P is power, I is current, and V is voltage. This equation shows that power increases when either current or voltage increases in a circuit.
Ohm's Law: voltage = current * resistance. If resistance is a constant, then voltage is directly proportional to current.
In an electrical circuit, current is the flow of electric charge, voltage is the force that drives the current, and resistance is the opposition to the flow of current. According to Ohm's Law, the relationship between current (I), voltage (V), and resistance (R) is given by the equation V I R, where voltage equals current multiplied by resistance.
Ohm's Law states that the relationship between resistance, current, and voltage is given by the equation V IR, where V is the voltage, I is the current, and R is the resistance. This means that for a given voltage, the current flowing through a circuit is inversely proportional to the resistance - as resistance increases, current decreases, and vice versa.
In a circuit with constant voltage, the relationship between current and resistance is inversely proportional. This means that as resistance increases, the current flowing through the circuit decreases, and vice versa.