To convert an RJ11 telephone jack to an RJ45 Ethernet jack, you will need to rewire the connections in the jack to match the Ethernet standard. This may require some technical knowledge and the use of specific tools. It is recommended to consult a professional or refer to online resources for detailed instructions on how to do this properly.
RJ45 is used with ethernet cables in computer networking while RJ11 is used in connecting telephone units.RJ45 contains more wires than RJ11and RJ45 is physically bigger than RJ11 to accommodate the extra wires
RJ45 was designed for LAN connection only. For modem lines you need RJ11. Thus the answer is NO.
Ethernet and modem.
RJ45 is a 8 pin connector used on networking(ethernet) cables RJ11 is 6 pin connector used on telephone cables in the USA
No, a conversion can not be made due to the different size of cables that each terminal end uses. An RJ45 uses a Cat , 8 wire cable where as a RJ11 uses a smaller 4 wire cable. The sockets for the RJ45 will be too wide to allow a RJ11 connector to securely connect to it.
RJ11 and RJ45 are the names for the terminators at the ends of the cables. RJ11 is the 2 pair (4 wire) terminator used for telephones. RJ45 is the 4 pair (8 wire) terminator used for ethernet cable.
rj45 which is the large one but bt use rj11 whichis smaller
The type of connector is used by the analog modems is RJ11 or RJ45.
rj11
No, you cannot. LAN ports are of type RJ45, when telephone port is RJ11. Basically it means that they have not only different size but also different number of wires.
Insert the MagicJack Plus device into the USB port on the device's power adapter. Use an ethernet cable (RJ45) to connect the MagicJack Plus to your Internet router. The ethernet cable must be plugged into the port labeled “Internet.” Connect your telephone to the MagicJack Plus using a phone cable (RJ11).
now currently use for rj 45