Highway Addressable Remote Transducer Protocol
You give it back to the owner, who has the manual.
she was a very good communicator
sory you cannot use msn email addrees in office communicator
In this situation, to calibrate a transmitter you need a power circuit and communicator circuit. The Hart communicator used in the calibration process is connected to the power source circuit in parallel. The power source circuit is the one that has ammeter, 250 Ohm resistor, and power source all connected in series. As the transmitter sends output mA, it creates volt drop across the 250 Ohm resister. Let's say the volt drop across the resistor was 1 Volt. Now, back to the Hart communicator. It is a load, meaning there will be a volt drop across the Hart communicator. Since it is in parallel with the power circuit, it is also parallel with the resistor. So, the 1 volt drop across the 250 Ohm resistor will also make 1 volt drop across the Hart communicator. Technically speaking, the 1 volt drop across the Hart communicator is only true if its resistor is also 250 Ohm. However, it does NOT matter what voltage drop is in the Hart communcator. It only sees the "relative" voltage drop changes to measure the changes in transmitter outputs.
People can use a media communicator to better communicate by using Microphone and Camera or Video, just like communicate face to face.
Nokia Communicator
A salesman must be an excellent communicator. If a salesman is not a good communicator they will not sell anything.
The hart was in hiding during hunting season.
The Communicator - IPFW - was created in 1969.
I believe it's the Nokia E90 Communicator.
Revation Communicator was created in 2003-11.