answersLogoWhite

0

In an instruction cycle with indirect addressing, the CPU fetches the instruction, decodes it to determine the memory address of the operand stored in a register, fetches the operand from the memory location pointed to by the register, and executes the instruction using the operand. Finally, the CPU stores the result back in memory if needed. This extra step of fetching the operand based on the indirect memory address adds complexity to the instruction cycle.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Related Questions

What are the phases of instruction cycle?

There are four phase of an instruction cycle namely: fetch; indirect; execute; write.


What are the different phases of instruction?

There are four phase of an instruction cycle namely: fetch; indirect; execute; write.


Difference between direct and indirect address instruction?

the different between direct and indirect adress instruction


What is instruction cycle with interrupts?

The instruction cycle is the basic operation cycle in a computer. This is what will take in data, process it and execute as required.


What is the difference between instruction cycle and machine cycle?

an instruction cycle may consist of a number of machine cycles.


What is a fetch as a cycles in a CPU?

The first part of the instruction execution cycle is the fetch cycle. Tnstruction cycle Each computer's CPU can have different cycles based on different instruction sets, but will be similar to the following cycle: 1. Fetch the instruction The next instruction is fetched from the memory address that is currently stored in the Program Counter (PC), and stored in the Instruction register (IR). At the end of the fetch operation, the PC points to the next instruction that will be read at the next cycle. 2. Decode the instruction The decoder interprets the instruction. During this cycle the instruction inside the IR (instruction register) gets decoded. 3.In case of a memory instruction (direct or indirect) the execution phase will be in the next clock pulse. If the instruction has an indirect address, the effective address is read from main memory, and any required data is fetched from main memory to be processed and then placed into data registers(Clock Pulse: T3). If the instruction is direct, nothing is done at this clock pulse. If this is an I/O instruction or a Register instruction, the operation is performed (executed) at clock Pulse. 4. Execute the instruction The Control Unit of CPU passes the decoded information as a sequence of control signals to the relevant function units of the CPU to perform the actions required by the instruction such as reading values from registers, passing them to the ALU to perform mathematical or logic functions on them, and writing the result back to a register. If the ALU is involved, it sends a condition signal back to the CU.


Explain instruction cycle?

An instruction cycle is the rudimentary operation cycle of any computer. It involves the CPU fetching a program from memory and executing it fully.


What is defference between direct and indirect address?

The I bit is 0 so the instruction is recognice as a direct address instruction The indirect address instruction needs 2 referance to memory to fetch & opened The I bit is 1 so the instruction is recognice as a indirect address instructionhe


How does the CPU keep track of which instruction to execute next?

The instruction register holds a pointer to the current instruction (in working memory) while the next instruction register points to the next instruction (the first instruction immediately after the current instruction's operands). If the current instruction is a jump instruction, it can change the next instruction register, allowing the program to branch to a new instruction once the jump instruction is processed. The next instruction pointer is automatically moved into the current instruction register once the current instruction has been processed. The entire process of executing an instruction is known as the fetch-decode-execute cycle.


What is the name of the cycle in which an instruction is taken from memory and loaded into the instruction register?

Fetch


What is the difference between bus cycle and instruction cycle?

Bus cycle refers to the process of transferring data between the CPU and memory or peripherals, while instruction cycle refers to the series of steps that the CPU goes through to fetch, decode, and execute instructions. In other words, bus cycle involves the movement of data, while instruction cycle involves the actual execution of instructions.


How would you describe the fetch execute cycle?

Fetch Execute Cycle A more complete form of the Instruction Fetch Execute Cycle can be broken down into the following steps: 1. Fetch Cycle 2. Decode Cycle 3. Execute Cycle 4. Interrupt Cycle 1. Fetch Cycle The fetch cycle begins with retrieving the address stored in the Program Counter (PC). The address stored in the PC is some valid address in the memory holding the instruction to be executed. (In case this address does not exist we would end up causing an interrupt or exception).The Central Processing Unit completes this step by fetching the instruction stored at this address from the memory and transferring this instruction to a special register - Instruction Register (IR) to hold the instruction to be executed. The program counter is incremented to point to the next address from which the new instruction is to be fetched. 2. Decode Cycle The decode cycle is used for interpreting the instruction that was fetched in the Fetch Cycle. The operands are retrieved from the addresses if the need be. 3. Execute Cycle This cycle as the name suggests, simply executes the instruction that was fetched and decoded