0
What else can I help you with?
How do you get the passage window back on track on a 1994 Pontiac grand am SE?
Remove the door panel. Find the track, for the passage window, loosen the track and put the glass, back in track. Put the track, back in track, and tighten it down. Put your door panel back on, and your ready to go.
How do I fix a separated zipper on my jeep soft top rear window?
If the zipper is separated from the top fabric you can sew it back on, but if the zipper puller is separated you can order a new one as a zipper repair kit and put a new one on there, the stopper for the bottom is included in the kit so it wont come off again. The process of getting that new puller on there can be a bit frustrating so be patient. There is a guide at the bottom of each zipper track, the easiest way to get the new one on is to remove that guide ( what you put the two sides into to start zipping it up ). then start in the fabric and run the new puller up the top side ( not window side ) of the zipper, then replace the guide. ( cripms on ) then it should work as normal.
How can I put a screen door back on track?
To put a screen door back on track, first, lift the door and align the wheels with the track. Then, gently slide the door back into place. Adjust the wheels if needed to ensure smooth movement along the track.
How can I put a sliding screen door back on track?
To put a sliding screen door back on track, first lift the door and align the wheels with the track. Then gently lower the door back onto the track and slide it back and forth to ensure it moves smoothly. If needed, adjust the wheels or track to ensure proper alignment.
How do you get your about me back on MySpace?
take the code off you put on when you wanted the about me hidden.
How can I put a pocket door back on track?
To put a pocket door back on track, first remove the door from the track by lifting it up and out. Then, realign the rollers on the top of the door with the track and gently lower the door back into place. Make sure the rollers are securely in the track before testing the door to ensure it slides smoothly.
You are trying to put in your back soft window of your 98 jeep wrangler how do you zip it back in is there a trick?
the trick is to unclamp the top from the windshield first, get some slack in the top, you may even need to unclamp or unvelcro around the doors, then go to the back, pull down on the top and begin to zip. if you have the single continuous zipper, it will be easy, if you have the 3 zipper one, do the top zipper first then the side ones.
How do you put dodge Dakota 1993 window back in track?
you need a window regulater you can not just put on track and it can cost some money
How do you put a passenger side window back in track on a ford expedition?
To put a passenger side window back on track on a Ford Expedition you should first carefully remove any old silicone. Next put the window back on track, and use Gorilla glue or silicone to secure it. Do not put the window down for at least 24 hours.
HOW Do you set a power window back on track on a ford focus?
To set the power window back on track in a Ford Focus, you have to remove the door panel. Once you get in there, you will see the track that you will need to put the window back on.
How do you put a driver side window back on track on a 1993 ford thunderbird?
Remove the inside door panel. The entire window mechanism will be visible. Put the window back onto the window track.
How do you put a manual roll up window back on track of a 1994 Chevy Cavalier?
You can put a manual rollup window back on track, in your 1994 Chevy Cavalier, by removing the inside door panel. The window track is easily visible with the door panel removed.
