0
Yes, you can use a 500mA (0.5A) supply instead of a 1A supply, but it depends on the requirements of your device. If the device draws more than 500mA, it may not function properly or could be damaged due to insufficient current. Always ensure that the power supply can meet the current demands of your application for safe and effective operation.
What else can I help you with?
What will happen if use a 12v 400ma instead of 12v 500ma?
i am not sure, BUT according to the answer in this post:Can_you_use_a_9V_600mA_adapter_on_a_9V_400ma_scanneryou need an adaptor of 9v and AT LEAST 500mA (assuming that the appliance draws 500mA)
Can you use a 12VCD 500mA instead of a7.5V 800mA AC power adapter?
Yes you can. But it may damage your computers power supply.
Is it safe to use a 1500ma instead of 500ma battery?
As long as the batteries are putting out the exact same voltage, then yes you can use a battery with a higher ma rating.
What will happen if use a 12v 500ma instead of 12v 300ma?
Using a 12V 500mA power supply instead of a 12V 300mA power supply will likely be fine as long as the voltage matches, but the higher current capacity (500mA) means the power supply can deliver more current if needed by the device. The device will only draw the current it needs, so having a higher current capacity power supply should not cause any issues.
Can you use 12v 600ma instead of 12v 500ma?
Using a 12v 600ma source is allowing 12 volts and 600 amps of power. If the device requires a 12v 500ma source, the larger source is acceptable. Please note that it will only be drawing on 500ma of the available 600ma.
What would happen if you used a 600mA adaptor instead of a 500mA?
Using a 600mA adaptor instead of a 500mA one could potentially supply more current to the device than it is designed for. Depending on the device's circuitry, this can lead to overheating and damage, especially if the device is not designed to handle the extra current. It's generally safer to use an adaptor with the recommended current rating for the device.
What does 500mA equal to?
500mA = 500 miliamper 1000mA = 1 amp so 500mA = .5 amps
Can you use a 12vac 1amp power supply on a device that requires 15vac 130mA?
No, you cannot.
What is the power when there are 500mA of current through a 4.7k Ω resistor?
p=i square x r = 500ma * 500ma = .25 * 4.7k = 1175 watts
What fuse should you use in a table lamp?
1amp 3 max depends on what rating lamp it is (or bulb).
Which is larger 1amp or 1ma?
1,000 milliAmps (mA) = 1Amp (A) 1,000,000 microAmps (uA) = 1Amp (A) so 1Amp is larger
Can use 1A power pack for 500mA device?
Yes, you can use a 1A power pack for a 500mA device. The power pack will supply the necessary 500mA the device requires, with some extra capacity. Ensure that the voltage output matches the device's requirement to avoid any potential damage.
