The formula you are looking for is I = W/E. Amps = Watts/Volts. As you can see a voltage must be stated to answer this question. 10kW = 10000 watts.
10kW = 10,000 watts
No; drawing more than the rated amperage from a transformer will cause it to overheat.
To find the amperage, use the formula: Power (W) = Voltage (V) x Current (A). Rearranging the formula to solve for current gives: Current (A) = Power (W) / Voltage (V). So, with 10kW at 220V, the current drawn would be 45.45A.
To calculate the amperage for a 10kW heater on a 3-phase 220V system, use the formula: Amps = (kW x 1000) / (√3 x Volts). So, Amps = (10 x 1000) / (√3 x 220) = 26.18 amps per phase. Therefore, the total current drawn by the heater is 26.18 amps per phase multiplied by 3, which equals approximately 78.54 amps.
yes
The company Briggs and Stratton offer a range of different generators, including a 10kw generator. Their website will allow you to browse and purchase the generator that you need.
10kw generators are available for purchase at Home Depot. They sell the Briggs & Stratton models which are known to be durable and dependable. These generators can get you through the worst of power outages.
To calculate the amperage, you can use the formula: Amperage = Watts / Volts. Thus, for 10,000 watts at 240 volts, the amperage would be 41.67 Amps.
Without the amperage an answer can not be given.
To calculate the amperage, you need to know the resistance in the circuit. Amperage is calculated using Ohm's Law: Amperage (A) = Voltage (V) / Resistance (R). Without knowing the resistance, we cannot determine the amperage.
A new 10kw generator can be purchased at AC Tool Supply, Northern Tool, Home Depot or Wise Equipment. Home Depot seems to be cheaper and most area have a store local.
To determine the amperage for a 24V 200AH battery, you use the formula: Amperage = Capacity (AH) / Voltage (V) So for a 24V 200AH battery: Amperage = 200AH / 24V = 8.33 amps