It helps to have a schematic in changing the traction drive belt on a x300 JOHN DEERe. Making the area accessible can be tricky. Once it has been revealed, it can be accomplished simply.
How Do I change A drive belt on a John Deere LT190?
how do you tighten belt on T155 john deere
how to change drive belt z225
yes you can but sent me the belt size so i can make sure
Need help in routing the transmission drive belt on my 165 hydro john deere
The link below gives info you need.
i need a diagram for installing a belt on a john deere lawn mower 330
How do you change a mower deck belt on a John Deere L130?Read more: How_do_you_change_a_mower_deck_belt_on_a_John_Deere_L130
To change the drive belt on a John Deere 345, first, ensure the engine is off and disconnect the spark plug for safety. Remove the mower deck by detaching it from the tractor, then locate the drive belt. Remove the old belt by releasing the tension from the belt tensioner, and install the new belt by routing it according to the diagram typically found on the mower deck or in the owner's manual. Finally, reattach the mower deck and reconnect the spark plug before testing the setup.
If the L130 is a John Deere then you can go onto their web site and find it there.
To adjust the traction belt on a John Deere LTR180, first, ensure the mower is on a flat surface and the engine is off. Locate the traction belt adjustment mechanism, which typically involves a tensioner or idler pulley. Loosen the tensioner bolt and adjust the belt tension as needed, ensuring it is not too loose or too tight. Finally, re-tighten the bolt and check the belt for proper alignment before testing the mower.
John Deere 210 38" mower deck drive belt: M40223 secondary drive belt