0
What else can I help you with?
How much steam is required to produce 5 MW power in steam turbine?
How much steam is required to produce 5 MW power in steam turbine?In fully condensing turbine we will need 20 TPH steam required to generate for 5MW
How much mmbtu is required to produce one ton of steam?
The amount of MMbtu required to produce one ton of steam can vary depending on the efficiency of the boiler and the pressure of the steam. On average, it takes about 10-12 MMbtu to produce one ton of steam at standard conditions.
How much water required to produce 1 ton of steam?
It would take 1 ton of water to create 1 ton of steam.
How much heat is required to produce 1kg of wet steam at 350 kilopascals from water at 20 degrees Celsius if steam is 95 percent dry?
It equals one kilpod.
How much natural gas is required to produce 1 ton of steam?
On average, about 1050 cubic feet of natural gas is required to produce 1 ton of steam. This can vary depending on the efficiency of the boiler and the heating value of the natural gas being used.
How much steam is required to generate 1 MW power in 600 MW unit?
3.5 ton steam
How much electrical power is required to run this steam cleaner?
This steam cleaner does not use any electrical power.
How much water is requried to condense per ton of steam?
Approximately 30,000 gallons of water is required to condense one ton of steam.
How much steam need 1 kilowatts?
To produce 1 kilowatt (kW) of power using steam, you need to consider the efficiency of the steam system and the specific energy content of the steam. Generally, about 2.4 kg of steam at 100°C can produce roughly 1 kW of power for one hour in a typical steam turbine. However, this can vary based on the efficiency of the turbine and the conditions of the steam.
1 pound of water equals how much steam?
1 pound of water at sea level can produce approximately 26.8 cubic feet of steam.
How steam required for steam tracing of jacketed lines is calculated how much steam required for sulfur melting?
The steam required for steam tracing is calculated on the basis of the amount of heat transfer that is required or the temperature that you want to maintain with the help of steam. It also depends on the pipe material through which the steam is passing,the condition of the steam that whether it is saturated or superheated etc. Overall heat transfer cofficient is calculated considering all the factors like fouling or scaling,inside and outside dia. , surface area etc. After calculating the amount of heat to be transferred, the requirement of rate of steam is calculated. Generally, Low pressure steam is used as it has got more latent/Sensible heat as compared to MP or Superheated steam.
How much gas produce of rice husk 1 kg?
The gas production from 1 kg of rice husk can vary depending on the gasification process used, but it typically yields about 1.5 to 2.0 cubic meters of syngas. This gas primarily consists of carbon monoxide, hydrogen, and methane. The efficiency of the gasification process and the moisture content of the rice husk can influence the exact amount produced. Overall, rice husk is considered a valuable biomass resource for energy production.
