1 bushel [US, dry] = 1.2444560268 cubic feet. A 60' diameter bin will have 2,827.4333 cubic feet per vertical linear foot. Therefore, one vertical foot of corn in the bin will be 3,518.62 bushels (approximate). This is based only on the straight bushel volume; it does not allow for corn which may be light (or heavy) on test weight, or with a moisture content outside the norm.
How many bushels of what? Corn? Barley? Wheat? Rice? Please be more specific when asking these types of questions.
AnswerA dry bushel of corn weighs 56 pounds. Therefore a ton of Corn will be just over 35.7 bushels. (2000 pounds/56 pounds = 35.714286)The above answer seems incorrect. One ton (of corn or anything else) is NOT equivalent to 200 but to 2205 pounds (one pound is about 453,6 grams).Therefore one ton of corn is equivalent to 39.375 bushels (2205 / 56).Both of the above answers are correct. A short ton is 2000 pounds. A long ton (not very common) is 2240 pounds. A metric ton (also spelled tonne) is 2205 pounds, or 1000 kilograms.So one short ton of corn is equivalent to 35.7 bushels,One long ton of corn is equivalent to 40 bushels,One metric tonne of corn is equivalent to 39.4 bushels
how many linear feet in a 20 foot diameter
Depends on a lot of factors- but the average yield of well cultivated corn is 160 bushels per acre. A bushel of shelled, dried corn is 56 lbs. That is 8960 pounds, or about 4.48 tons.
74.4 ft2
fifty thousand bushels in a corn contract
6.875 bushels.
Approximately 8,270.35 bushels.
9,915,051,000 bushels.
One contract on the Chicago exchange is 50,000 bushels.
There are 0.8036 bushels in one cubic foot.
1,575,300,000 bushels, according to the US Department of Agriculture.
For the 2009 crop season, Texas' average corn yield was 108 bushels per acre.
27000
Corn silage is typically measured in tons rather than bushels, but if you need to make a conversion, one ton of corn silage is roughly equivalent to about 8 to 10 bushels of corn. The exact conversion can vary depending on the moisture content and the specific type of corn. Generally, the conversion factor used is about 9 bushels per ton.
One metric ton of corn is equal to 45.9296 bushels. One bushel of corn is equal to .021772 metric tons.
Assuming that the corn meets the normal acceptable test weight of 56 pounds per bushel, there are 1,785.7 bushels in 100,000 pounds of corn (maize).