Yes, two types at least. One has a canvas strap that tightens as you turn it and the other is like large jawed pliers.
A Torx wrench is a different kind of wrench for special Torx screws. Same principle as Allen or Bristol wrench. Torx is designed so you can get more torque on the screw.
A speed wrench ratchets back and forth.
A 35mm wrench....
An air Impact wrench is a tool shaped a bit like a power drill. It holds special strong steel sockets and applies air power onto a rotary shaft a bit like a hammer drill. Used mostly for undoing very tight nuts especially lug nuts on trucks .
A torque wrench was invented by Conrad Bahr in 1918 .
No, any filter wrench will remove the filter.
Requires a special wrench tool. Look on eBay for "Volvo Oil Filter Wrench" They are about $10.
No..maybe a oil filter wrench to remove it, but, install it by hand (HAND TIGHT)
No. 2008 highlander has a aluminum filter housing you need to remove with a special type of filter wrench. I was able to tap mine loose without a wrench but it could be at 24n-m tight which is difficult to loosen.
You need to have a special filter wrench to do it, which is a cup-type as opposed to a band-type. Filter is cartridge not spin-on.
YesYes
underneath more so to the passenger side of the vehicle and you need a special filter wrench to reinstall filter after change
The oil filter on a 2003 Dodge Dakota is located on the bottom, right side of the engine. A special filter wrench is needed to properly grip and remove the filter.
a wrench with a metal band that wraps around oil filter that ables you to turn aka an oil filter wrench
its in the fuel tank---yeah i now dumb plac --its built into the fuel pump no in line filter-- takes a special wrench to get it out
Just a socket wrench that will fit on the lid for the filter because it is a an actual filter cannister not the usual steel filter
any oil filter wrench - it warps around the filter and you can adjust it - the wrench looks like a giant ring