0
What else can I help you with?
How much pressure in a 100 mm diameter vertical pipe with 40 meters height?
It depends on whether the pipe is open or closed and what it contains. If the pipe is full of water to a height of 40 m and open at the top, the pressure at the bottom is about 57 psig. The diameter doesn't matter.
What is the difference between a pressure vessel and a column?
Columns should be installed in vertical direction only on the other hand pressure vessels can be installed in both vertical and horizontal direction and having certain height limitations for vertical installation.
What is the difference in blood pressure between the top of the head and bottom of feet of a 1.70M tall person standing vertically?
You have to use This Equation (delta) P=Density x gravity x height in This case Density = Density of blood gravity on earth's surface =9.8 height =1.7 m
Head loss in a pipe?
when a pump is used to pump a fluid into a vertically arranged pipe , fixed upright; the fluid would reach a certain height at which point the fluid would stop in a pipe. this height at which the fluid has stopped propelling upward could be described as the head of water. this measure relates to the pump power . should a pipe system be used which is less than the head height then fluid will be seen to flow out and over the side of pipe. if the connecting pipe happens to be of longer measurement than the head, and hence when fixed at height is taller than the head height then the fluid will not likely be seen flowing out of pipe . if a pump is mounted within a basement of work hall, but the resulting pressure is utilised on the ground floor of same building then some pressure will be lost when pumping upwards , and could be described as head loss.
What is the standard height for urinal sensors with connection?
Standard height for urinal sensors should be 1450mm centre from floor level
Height of 500 mw boiler?
approx 170ft.
Pressure in a pipe draining an elevated water tank depends on the height of the tank but does it also depend on how full the tank is?
Yes, the pressure in a pipe draining an elevated water tank depends on both the height of the tank and the level of water in the tank. The pressure is directly related to the height difference between the water level and the point of discharge, and it decreases as the water level in the tank drops.
What is the formula for calculating the water pressure height based on the water pressure and the height of the water column?
The formula for calculating water pressure height is: Pressure Density of water x Gravity x Height.
What kind of treatments are their for height blood pressure?
There is no such thing as "height blood pressure".
What relation between pressure and height?
Pressure decreases as height increases and vice-versa.
How does more pressure affect the height of an object?
Increasing pressure will compress the object, causing it to decrease in height. Conversely, decreasing pressure will allow the object to expand and increase in height. The relationship between pressure and height is influenced by factors such as the material and structure of the object.
How height can you load a pick up truck?
being a maintained center of gravity
How do you get the percentage of atmosphere above a height given in km and then how do you get the pressure for the height in mb?
To find the percentage of atmosphere above a certain height in kilometers, you can use the barometric formula to calculate the pressure at that height. Then, you can simply divide the pressure at the given height by the pressure at sea level (1013.25 mb) and multiply by 100 to get the percentage of atmosphere above that height.
Design calculation of chimney height with respect to boiler horsepower?
dp=Cah(1/T0-1/T1)
In power stations what does the flickering lights on boiler chimneys signify?
The flickering lights on boiler chimneys in power stations are aircraft warning lights. The spacing and blinking frequency are chosen to signify the height of the obstruction.
Why height is always measured at sea level?
atmospheric pressure ... the diff. in the two pressure in which it will find the height from the level of sea
What is the relationship between specific weight and pressure?
Pressure varies with height as a function of specific weight. p=p0+specific weight*height Where height is the distance below the reference pressure p0 (usually at a free surface).
