0
What else can I help you with?
What is the difference between mold and cavity?
mould is a hollowed out block that is filled with a liquid like plastic , glass, metal, ceramic raw material. while cavity is a small passage for flow of material in mould or die.
What is a machinists V block?
A machinists V block in its simplest form is a block of metal with a V shaped (usually 90 degree V ) groove cut into it ( typically with a small square notch at the bottom of the V running its full length ) It is machined with high precision and usually hardened to prevent excessive wear. It is used to hold materials such as round bar securely while machining it. Imagine placing a round bar on a flat surface and trying to hold it while you try to drill a hole through it. the block may have other grooves to permit secure attachment to the work surface and also to accommodate a horse show shaped clamp to hold the work in in the V
What bore is a 355 engine?
The bore of a 355 engine typically refers to the diameter of its cylinders, which is usually around 4.00 inches (101.6 mm). This engine is commonly associated with the 350 cubic inch small-block V8 engine from General Motors, which can be stroked to achieve the 355 cubic inch displacement. The 355 is often used in performance applications due to its balance of power and reliability.
What is bleed valve?
(engineering) A small-flow valve connected to a fluid process vessel or line for the purpose of bleeding off small quantities of contained fluid.
How can you remove small ding from stainless steel refrigerator?
You can try the little device they have for removing small dings from sheet metal on cars. It's a suction cup device that you tighten down. Check an auto supply store.
Is a Chevy 6.0 a small block or big block?
It is a small block
Small Block Chevy 350 timing?
how do i set the timing for a chevy 350 small block?
Engine rotation small block Chevy?
The small block chevy turns in a clockwise rotation.
Is a 5.3 Chevy a small or a big block?
It is a small block.
Small block Chevy?
Yes. what is the question?- about a sm. block chevy.
Will small block Chevy lifters fit a big block Chevy?
Yes.
Will a Chevy big block transmission bolt to a Chevy small block?
yes
Will rods pistons and bearings from a 1975 small block Chevy fit crank and block of a 1997 small block Chevy?
Theoretically, yes.
What is the weight difference between a Chevy 454 and a Pontiac 400?
For complete engines, the weight of the average (stock) 400 Pontiac at about 650 lbs. is roughly between the average (stock) Chevy small block at about 575 lbs. and the average (stock) Chevy big block at about 680-685 lbs..
What is the firing block of a small block Chevy?
1,8,4,3,6,5,7,2.
Will a small block bolt to a 1995 big block trans?
Chevy to Chevy...yes.
Do you have a diagram for firing order on a 1985 Chevy small block?
All small block chevy's standard firing order is 18436572.
