0
Decreased T1 and increased T2 signal intensities in MRI typically suggest changes in tissue composition or pathology. A decreased T1 may indicate the presence of edema or fat, while an increased T2 often points to fluid accumulation or inflammation. These changes can be associated with various conditions, such as tumors, infections, or demyelinating diseases. Overall, the combination of T1 and T2 findings helps in diagnosing and characterizing different medical conditions.
What else can I help you with?
What does T1 or T2 mean in electrical terms?
T1 and T2 commonly refer to the primary and secondary terminals of a transformer. T1 is typically the primary side where the input voltage is applied, while T2 is usually the secondary side where the output voltage is obtained. The terminals are used to connect the transformer to the electrical circuit.
Derivation of coefficient of performance of carnot refrigeration cycle?
COF = h1-h4/h2-h1=T1(s1-s4)/T2-T1(s1-s4)=T1/T2-T1
How are the tensions t1 and t2 related?
Tensions t1 and t2 are related in that they are both forces acting in opposite directions on an object or system. The relationship between t1 and t2 depends on the specific situation and the forces involved.
Where is the T1 and T2 on the spinal cord?
T1 and T2 refer to the first and second thoraxic vertebrae. They are the 8th and 9th vertebrae, starting from the top.
What is a low t1 and low t2?
T1 and T2 can refer to the Thoracic vertebrae (part of your spine). But I don't know what 'low' would imply.
What is the difference between T1 and T2 for a computer hard drive?
The CalDigit Thunderbolt™ T1 and T2 primarily differ in that the T1 is a single-drive solution whereas the T2 is a dual-drive solution. See related links for more information.
Timing diagram of shld 16 bit instruction?
The SHLD (Store H&L Direct) instruction takes 5 machine cycles and 16 clock states, not including any wait states. Opcode fetch: T1, T2, T3, and TX Low order address fetch: T1, T2, T3 High order address fetch: T1, T2, T3 Store L: T1, T2, T3 Store H: T1, T2, T3
At standard temperature a gas has a volume of 350 mL the temperature is then increased to 137 C and the pressure is held constant What is the new volume?
T1 = 273.15K. T2 = 410.15K. V1 = 350mL. V2 = ? P1 = P2. Since pressure is constant you can use the formula. V1/T1 = V2/T2 Rearrange the formula to get: V2 = T2V1/T1
What is the difference of a German tiger 1 and a German tiger 2?
t1:german tiger 1 t2:german tiger 2 t1:armor 69 t2:armor 89 t1:speed 14 mph t2:speed 20 mph t1:gun is 98% great t2:gun is 99% good so german tiger 2 is better
What P1v1 divided by t1p2v2 divided by t2 solve for t1?
This question refers to the combined gas law: (P1V1)/T1=(P2V2)/T2, where P is pressure, V is volume, and T is temperature in Kelvins.To solve for T1, rearrange the equation to isolate T1.T1=(P1V1T2)/(P2V2)
What are the differences in T1 weighted and T2 weighted MRI images?
T1= Fat- Appears Bright e.g. Grey matter = Water- Appears Dark e.g. CSF, water T2 Just opposite to T1
Why iid random process is stationary?
Let X(t) be an iid random process and hence X(t) has an identical distribution for any t i.e., distributions are identical at instants of time t1, t2...tn, so 1st order pdfs f(x1;t1), f(x2;t2)....f(xn;tn) are time invariant and further X(t1) and X(t2) are independent for any two different t1 and t2. So, f(x1, x2, . . . , xn; t1, t2, . . . , tn) = f(x1;t1)*f(x2;t2)*....*f(xn;tn) f(x1;t1), f(x2;t2).... f(xn;tn) are time invariant, therefore their product f(x1, x2, . . . , xn; t1, t2, . . . , tn) is also time invariant which is nth order pdf. So X(t) is strict sense stationary.
