Most power drills have a reverse switch near the trigger.
If you have the drill in your hand with the chuck away from you, if the rotation goes clockwise it is going forward and if it is counterclockwise it is going in reverse. When you use the drill you usually go forward. To remove the drill bit look for the reverse lever and once it is going counterclockwise place your hand on the front part of the chuck and the drill bit should be released.
To supply the power to the drill.
When you want to remove a screw.
http://userguides.50webs.com/
Mainly that one is a drill, and the other, a screwdriver.
SOME Power Drills are made that can do both but not all power drills will do this - you need to read the instructions for the drill.
A compressed air drill is commonly referred to as an "air drill" or "pneumatic drill." It is a type of power tool that uses compressed air to power its drilling operation.
The only difference between a battery drill and a regular drill is the type of power source. A battery drill is one that does not require a power cord, but can only last a finite amount of time.
The two types of machine drills are the drill press, which is a stationary tool with a vertical orientation, and the handheld power drill, which is a portable tool typically used for smaller or on-the-go drilling tasks.
a power bee. or a power drill bee. they drill into wood and lay their eggs or whatever bees have. and they are deadlious. wouldn't wanna get stung with a drill. ino this cuz they once were drilling holes in my back deck.
start generator, plug in variable speed drill, set drill to forward, squeeze trigger, quickly spin drill in reverse by hand. be sure generator main breaker is on.
The year the first power drill was made was 1895. It was made by the German engineering company C&E Fein. It combined the power of the electric motor with a manual drill to make the first power tool.