Stucco
Another word for the word 'stucco' would be the word plaster. They both are defined as fine plaster used for coating wall surfaces or molding into architectural decorations.
my husband did our living ceiling by doing a textured plaster & spraying fine opalescent glass chips on it to get a sparkly finish.
A Tyrolean finish is a textured surface applied to plaster using a machine that emits fine grains of material onto the wet plaster. This finish is commonly found on exterior walls and ceilings to add both decoration and a slightly rough texture for increased durability and resistance to weathering.
To achieve a smooth and polished finish on plaster walls using sandpaper, start by selecting a fine-grit sandpaper, such as 220 or higher. Lightly sand the surface in a circular motion, focusing on rough or uneven areas. Be sure to sand evenly to avoid creating dips or grooves. Wipe down the walls with a damp cloth to remove dust and debris before applying a primer or paint for a polished look.
You can plaster a wall with Portland cement and fine sand mixture. Polymers are plastics and I've found nothing on using them in a mixture to plaster a wall.
The best plaster for sculpture is typically considered to be hydrocal plaster, which is known for its strength and fine detail reproduction. You can purchase hydrocal plaster at art supply stores, online retailers, or specialty sculpture supply shops.
if the white coating quite dusty its fine its just particles of the machines in the factories
Slaked lime putty is a traditional material used up until the introduction of Portland Cement in the mid 1800s. It is still used in restoration work. It is a base for plaster walls, stucco, and mortar for brick work, where the final product depends on the additives used. Very fine sand and sometimes hair is added for interior plaster, where coarser sand is used in masonry.
yes you can as long as it is a fibreglass cant not a plaster cast it will be fine
Gypsum is the evaporite mineral used to make plaster and drywall due to its natural properties that make it ideal for construction purposes. When gypsum is ground into a fine powder and mixed with water, it forms a paste that can be molded into shapes or spread onto surfaces to create smooth finishes on walls and ceilings.
biotite mica is used to make plaster and other construction materials
To remove the coating from chipboard, you will need to sand the area. This can be achieved with the use of an electric floor sander and fine grit sandpaper.