answersLogoWhite

0

Torx is a six sided star shape used on bolts. Draw a hexagon or six sided shape and on the flat sides between the points draw a V half way to the center between each point. That is the Torx shape.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What size star socket is needed for the calipers on a 1995 Mercury Villager?

Torx T 40 socket


What socket is needed to remove 91 cavalier wheel cylinder bolts looks like reversed torx?

Any type of socket can be used to remove a 91' Cavalier wheel cylinder bolt that looks like a reversed torx. However, make sure the socket is a bolt head socket.


What size Torx bit do you need to remove the caliper of a 2000 Silverado?

T55 TORX BIT ON THE FRONT 12MM SOCKET ON THE REAR!


How do you get a torx bolt out of a jeep?

Many auto repair shops like advance auto, autozone, pep boys... etc have torx bits either in the form of a screwdriver with the torx bit on the end or as a socket for your socket wrench. On the funnier side.... just pick it up! Here's your sign.


What size torx head socket do you need to remove the front bumper of a jeep wrangler?

The correct size Torx bit is a T-55.


What size torque socket do you need to remove the brake caliper on 2001 VW jetta 20?

it is an Allen wrench not a TORX socket


Where is the IAT sensor on a 1996 Saturn SL1?

Behind the throttle body opening under the throttle position sensor. Takes Torx t-20 bit to remove -- 2 screws, use Torx bit on a 1/4" socket drive with a 1/4" socket to break seal on Torx screws.


How do you replace Volvo v70 license plate bulb socket?

You need a torx screwdriver....


What size torx socket is used to replace the hub assembly on a 2002 Chevy Cavalier?

T-55 Torx Socket (DO NOT USE AN ALLEN WRENCH) - To remove the 3 bolts that secure hub assemble to steering knuckle. 1 -3/16 deep socket - To remove axle spindle nut.


What type of torx socket do you need for the two bolts that hold the ignition switch on a 1998 chev k1500 4x4?

its called an inverted torx, but I dont remember the size


What torx socket is required for my 2001 GMC sierra front brake caliper?

t-55


What is the tool that you use to take off the tilt on the culmm so you can get to the igniton?

inverted torx socket.