inverted torx socket.
A pan and tilt works by getting rid of fumes that are produced cooking on a pan. It is a fantastic tool for the kitchen.
A pan and tilt works by getting rid of fumes that are produced cooking on a pan. It is a fantastic tool for the kitchen.
If it is a tilt wheel, you will need a special tool to remove the pivot pins.
The bolts that hold the tilt steering together work loose and need tightening. You have to take the column apart including the bowl and tigthten them. You need special tools. If you take the initiative to purchase the tool, pull the tilt wheel pins and then pull the knuckle out, be sure to purchase a bearing kit and replace the bearing while you are in there. A lot of the "looseness" you feel in the wheel will be due to these bearings wearing out over time. A good kit includes the igition swtch actuator. Replacing this at the same time will save you a lot of hassles down the road.
First off there is no air bag in a 1988 ford f150, (Air bags were nit instated till1992). The problem is the slip pin that rides on the gear for the tilt. It engages and disengages by pushing forward on the turn signal lever. It is a push pin that slips out of the press holes and will not engage in the grove. Just take your time and look up some diagrams and you will be O.K.
Go to Sears or any parts house and get a swivel joint spark plug socket.
It comes from being stepped on. At one time Mattel sold a small tool to fix the issue.
A lug wrench is the tool needed to take a wheel off.
A level is a tool that is placed on a solid surface. There is a string hanging on the level, and if it tilts, the surface isn't an even horizontal surface. If the string doesn't tilt, the surface is even.
I would try auto zone. You can rent out a lot of tools there but you will have to pay a deposit
Your hands
What size is the tool to take the brakes off of a 99 kia sephia