Wood, metal, plastic.
Hope this helps. :)
A door which hangs on hinges. The hinge is what allows a door to open and close and is made of metal, attached to the door by bolts or screws.
A hinge pin is a pin that holds together two hinge plates, one of which is fastened to the door and the other is fastened to the door jamb. There are usually two or three hinge assemblies used on each door, one near the top, one near the bottom, and sometimes one at the middle.
A metal hinge is still stronger and thinner than a plastic hinge, and is less likely to fail.
To repair a broken door hinge on a 1991 Cherokee Briarwood, a new piece of metal should be welded in to hold the hinge. Then, a new hinge should also be welded in that is aligned with the door pin.
door hinges attached to door and hinge post
Metal door locks are made of metal.
A angle grinder with a metal cut-off wheel can easily cut off a metal hinge. Use eye protection and be prepared for sparks.
The pin that slides into a door hinge is called a hinge pin. It is usually removable to allow for door removal or adjustment.
It is called a door closer. The door closer controls the speed at which the door closes to prevent it from slamming shut.
Are the screws on the door hinge stripped?
with metal
A right hinge door may be advantageous over a left hinge door for individuals who are right-handed, as it allows for easier access and movement when opening and closing the door. Additionally, a right hinge door may be more convenient in certain room layouts or configurations.