0
What else can I help you with?
What you would use a site drawing for?
drawing landscape
How many kva to power a 180amp welder?
To determine the kVA required to power a 180 amp welder, you can use the formula: kVA = (Voltage x Amperage) / 1000. For example, if the welder operates at 240 volts, the calculation would be (240V x 180A) / 1000 = 43.2 kVA. Therefore, you would need at least a 43.2 kVA power source to operate a 180 amp welder efficiently.
Will a 800 watt generator have enough power to operate a 90 amp welder?
No, unless you can set it low and can be assured that it wont use more than say 4000watts, the welder might momentarily use more power than what you set it to, it should not wreck the welder i would imagine unless it is a fancy mig welder or something, set the welder low you should be fine but for high end use she should be firing out 8 or 9kw so keep it low if you must.
What would be a good question to write for the topic of learning to be a welder?
If one is writing a paper on how one learns to be a welder, it might be a good idea to start with what a welder does and what kinds of construction projects a welder works on. In addition, touching on the test one must take to become a welder would be important. Finally, one might want to discuss the differences between an apprentice, a journeyman and a master welder.
Is the welder salary the right way to go or are there others?
If you want to be a welder, there are many different types of welding jobs available. Depending on what level you are, the wages will vary. For example as an entry level you would look at an average of $34,369/year. As an intermediate welder you would average $39,861, and as a senior welder you would average $46,974.
Which of the following accessories would you use to create a drawing?
Paint
Where would you have to live if you were an underwater welder?
in watwr
Are you looking for a permanent jewelry welder for your business or personal use?
Are you seeking a permanent jewelry welder for your business or personal needs?
How many amps does a 220 volt welder draw?
To determine the amperage drawn by a 220-volt welder, you can use the formula: Amps = Watts / Volts. For example, if the welder is rated at 5,000 watts, it would draw approximately 22.73 amps (5,000 watts / 220 volts). The actual amperage may vary based on the welder's specifications and settings. Always refer to the manufacturer's guidelines for precise information.
What size welder do you need for 6mm steel?
In order to weld pieces of 6mm steel you can use any type of welder. Depending on how strong and how pretty the weld needs to be will determine the type of welder you choose.
What is the formula to calculate the time required for welding?
This will depend on the welder. It would be the amount of time the welder takes to do the job and the materials available.
What are the two division of drawing?
freehand - is a technique of making a drawing without the use of drawing instrument mechanical - is a technique of making a drawing with the use of drawing instrument
