answersLogoWhite

0

check silenoid at other end of + cable for loose connections ,To check silenoid connect the 2 connectors together w/ screwdriver & it should start ....If this doesn't work check connection at the starter,starter could be bad.....

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Why wont a polaris 500 sportsman start with stater?

2004 polaris sportsman 400 has new starter, battery and selenoid but still won't start what else can it be


If a 2001 Polaris 90 Sportsman ATV started clicking when you try the start button what could be the problem?

Sounds like a dead battery. Try charging the battery, then start.


04 polaris 600 sportsman engine parts diagram?

My poolaris sportsman 600 was running,battery ligfht was flashing and when I turned it off it wouldn start again I put new battery in it yedterday,have powEr to lights and wench but won't start any answers?


Can you pull start a polaris sportsman?

Yes, should be one on the right of the quad


Why does a 2017 polaris sportsman turns over but won't start?

You may have a dirty fuel filter.


Polaris sportsman 700 2001 starts then wont start no spark?

try disconnecting gauge cluster


Were is alternator on polaris 400 sportsman?

The alternator, or stator, is behind the pull-start cover on the right side of the engine.


When you try to start myhyndai tibroun car it seems hesitant to start?

its's the battery


How much oil in 500 polaris sportsman?

Polaris oil tanks hold around 2 qts of oil . Put in a qt and a half , start the engine to fill the filter . Let it sit a few minutes and check the oil , add if needed .


Why won't my 2003 VW Golf start without a jump start I disconnected battery now it won't start. Battery is good?

The battery seems to be a problem on this vehicle. A recharge could fix the issue but a new battery may be necessary.


Why a Polaris trailblazer 250 won't start?

polaris 250 wont start


Can you jump start a polaris fourwheeler?

Yes, you can jump-start a Polaris four-wheeler, typically by using jumper cables and a compatible vehicle or a jump starter. Make sure to connect the positive terminal of the dead battery to the positive terminal of the working battery, and the negative terminal of the working battery to a grounded metal surface on the four-wheeler. Always consult the owner's manual for specific instructions and safety precautions before attempting a jump-start. If the battery is old or damaged, replacement may be necessary.