Usually if there is no spark when trying to start a all terrain vehicle the battery is dead. Check the battery terminals or try charging the battery.
It's to control a fire hazard in case of an errant spark, so possibly a melt down of your ATV
spark gap is 0.28mm.
.028
Not all atv's have them.
Replace coil
The spark plug gap for this kind of ATV is .035.
To change the spark plug on a Suzuki ATV, first, ensure the engine is cool and disconnect the spark plug wire. Use a spark plug socket and ratchet to remove the old spark plug by turning it counterclockwise. Inspect the new spark plug for proper gap settings, then install it by hand to avoid cross-threading, followed by tightening it with the socket. Finally, reconnect the spark plug wire and ensure everything is secure before starting the ATV.
Is asking
In the cylinder head attached, to the top of the cylinder.
The spark plug on a Suzuki King Quad 700 ATV is located on the engine's cylinder head. To access it, you typically need to remove the plastic cover on the left side of the ATV. Once the cover is removed, you'll see the spark plug wire leading to the spark plug, which is situated near the front of the engine. Make sure to use the appropriate tools to safely remove and replace the spark plug.
18MM
NO; it's there to stop stray sparks from burning down forests