0
What else can I help you with?
1981 GL1100 antifreeze capacity?
The 1981 Honda GL1100 has an antifreeze capacity of approximately 3.6 quarts (or about 3.4 liters) when including the radiator and the engine. It's important to use the appropriate type of coolant, typically a mixture of antifreeze and water, to ensure optimal engine performance and longevity. Always check the owner's manual for specific recommendations and maintenance guidelines.
Where does the transmission fluid go on a 1976 Honda goldwing 750?
First, Honda did not mak a "750" Goldwing. In 1976 the Goldwing was a 1000 cc machine known as the GL1000. As for transmission fluid, the 1976 GL1000 does not use transmission fluid. It has a wet clutch, and the engine oil provides all the lubrication that the clutch and transmission requires. For this reason it is extremely important to use the correct engine oil and change it at regular intervals. For detailed information check out www.randakks.com.
What size heads on 350 89 camaro?
Your question is a little vague, so im assuming you're asking which is better between 350 and 305 heads. Many people will tell you it doesnt matter. I think if you have a 350 engine then you should use 350 heads. the 305 heads will have higher compression, which will make the car louder, and somewhat faster, however, if you use 305 heads on a 350 engine then you should use a high octane fuel, so it will be better on your engine. Only use 305 heads if you know what your doing. if not you should probably stick with 350 heads. i hope that answered your question.
What Brake oil do you use for a 1983 Honda Goldwing Aspencade GL1100?
dot 3 or 4
Type of oil used for 1982 Honda goldwing gl1100?
I use Motul 10w40. Check with your local dealer.
Just bought 416 heads not sure of year or what sparkplugs to use help?
Well, what plugs to use all depends on the rest of the engine. These heads were used on TPI camaros (305) so a trip over to thirdgen.org will be your best bet to get the info on these heads.
Why does your truck use a lot of oil?
Worn or destroyed engine seals - Piston, Valve, Heads etc.
How do you convert tbi to carb?
tbi engine top end is different from carb engine top end. on a carburated engine, the intake and heads use 90 degree angles for intake mounting bolts. on a tbi engine, the intake and heads use 75 degree angles for intake bolts. you can choose one of these three options: entire new engine. intake manifold designed for tbi heads but utilizes a carb mounting flange on top or tbi manifold to spread bore or square bore adapter
Can camel-hump heads be used on a 1955- 265 engine?
Yes, That would be a good head to use on that block.
Can you use 305 heads on a 350?
Yes, you can use 305 heads on a 350 engine, but there are some considerations to keep in mind. The 305 heads have smaller combustion chambers, which can increase the compression ratio of the 350 engine, potentially leading to more power. However, this setup may also restrict airflow, limiting the engine's performance at higher RPMs. It's important to ensure compatibility with the intake manifold and other components for optimal performance.
Can olds 307 7A heads fit on a 403?
No, Oldsmobile 307 7A heads cannot fit on a 403 engine. The Oldsmobile 307 engine has a smaller bore and different combustion chamber design compared to the 403 engine. Additionally, the 403 engine has larger cylinder bores and requires heads that are specifically designed for that engine to ensure proper fitment and performance. It is crucial to use compatible components when modifying or building an engine to avoid issues and ensure optimal performance.
What search engine should you use for looking up the Sift Heads 4 demo?
google,yahoo,windows live
