answersLogoWhite

0

What else can I help you with?

Related Questions

What are the cylinder head torque specs for 86 Yamaha radain?

The cylinder head torque specs for a Yamaha Radian is 35.61 Nm. You can also say the specs are 3.6 kgf-m and 26.3 ft.lbs.


What are the piston rod torque specs for a 2002 Honda accord 4 cylinder?

The piston rod torque specs for a 2002 Honda accord 4 cylinder are 151 ft lbs


What is the torque specs for 1998 Yamaha yz250 cylinder head?

20 ft lbs


What are the torque specs for a 2004 Yamaha blaster outer pressure plate for the clutch springs?

Yamaha Blaster Inner Clutch Spring Torque(5 Bolts with Springs) 4.3Ft-Lb. (51.6In-Lb.) Also, Center Bolt 5.1Ft-Lb. (61.2In-Lb.)


What is the torque specs for 1989 Yamaha 250 fourwheeler?

what are the torque specs on a 1989 yamaha 350 quad


What are torque specs for 1999 Yamaha rt 100?

The head bolt torque specs for a 1999 Yamaha RT 100 is 16 foot pounds. Specs can be found in Yamaha repair books.


How Fast Does A Stock Blaster go?

57 mph according to the factory specs


What torque specs for 200cc blaster crankcase?

8-11 Lb ft


How do you gap the piston rings on a 86 cutlass?

You will need feeler gauges, a ring spacer and separation tool, the correct specs for their correct placement on the piston and the gap specs.


What are torque specs for cylinder head on Yamaha 225dx?

For the Yamaha 225DX, the torque specifications for the cylinder head bolts are typically around 40-45 ft-lbs (54-61 Nm). It’s important to follow the proper sequence when tightening, usually starting from the center and moving outward in a crisscross pattern. Always refer to the specific service manual for your model year to confirm the exact specs and torque sequence.


Cylinder head torque specs for 88 Yamaha phazer?

18 ft/lbs for the nuts 11 ft/lbs for the bolts http://www.zenitram-inc.com/Manuals/PhazerCrank.jpg


Torque specs for Yamaha banshee engine?

Yamaha banshee stock , how's the compression should be??