no
When you are moving your lawn with an electrical mower with a cord then you should travel horizontally from each end of your lawn. You should make sure that you are not turning your mower towards the cord, otherwise, the card will tangle.
Chances are the coil spring has a broken "locking tang" on the end. They are notorius for breaking when you pull the cord to start the mower. You can go to Sears and purchase the OEM replacememt fairly inexpensivly. The new spring is stronger and contains the instructions on how to install it.
There is a small cord on the mower. DO not put your stylus directly on the loop at the top of the cord. Put your stylus at the tip of the arrow pointing to the cord. You may have to pull several times before getting the lawn mower to start. Hope this helps you.
The cord on your Honda lawn mower may not pull if it is tangled, the engine is seized, or the recoil starter is broken.
No the pull chord will not cause the pull cord to be tight. The coil on the lawn mower will cause the compression to be tight.
The pull cord of a lawn mower is used to manually crank the engine to get it started. As the engine is quickly turned, a spark is created which begins combustion.
When a lawn mower will not start by pulling the cord, it probably needs maintenance. Changing the spark plug often will fix the issue.
get a new one
For efficient and safe use with a standard electric lawn mower, it is recommended to use a 12-gauge extension cord that is at least 100 feet long.
Check the underneath of lawn mower for grass built up.
For a lawn mower, it is recommended to use an extension cord that is at least 14 gauge and 50 feet long to ensure safe and efficient operation.
sheared flywheel key. youtube has vids... type in mower cord backfires & you'll see instructions on how to fix it.