0
What else can I help you with?
What oil for trx 1987 250x?
10w-30
1987 Honda TRX 250X Spark Plug Gap?
It is a 18 mm socket that works to get the spark plug out, it took me a while to figure it out.
What is the top speed of a 2012 Honda trx 250x?
60
What is the Oil capacity for 91 Honda trx 250x?
1.5 quarts
How fast can a Honda trx 250x go?
Depends how much money you want to invest into it.
What is the top speed of a stock Honda trx 250x?
the current model goes around 60 MPH
What are some models of Honda quads that were released in 2013?
Honda quad models released in 2013 include the TRX 250X, the TRX 400X, the TRX 450R and the TRX 90X. 2013 Honda quad vehicles are available in sport, utility and youth models.
What is the valve clearance for a 1992 Honda TRX 250X?
Intake and exhaust valves have the same clearance: 0.10 mm (0.0004 in).
How do you adjust valve intake on 1992 trx 250x?
Adjusting the valves isn't hard but it does take some knowledge of the subject. Check out my bio page for help.
How fast does a 1987 Honda TRX250X 4 wheeler go?
i have a trx 250x, but i alternate tire sizes a lot, with the normal sized ones, i can get 60 mph out of it, then when i put the smaller tires on it, i can only get 52mph out of it, but as far as if everything were stock, id say close to 60mph..
How is the valve clearance for 1987 Trx 250 x?
The valve clearance for a 1987 Honda TRX 250X is typically set at 0.05 mm (0.002 inches) for the intake valves and 0.08 mm (0.003 inches) for the exhaust valves. It's important to check and adjust the valve clearance regularly to ensure optimal engine performance. Make sure the engine is cold before making adjustments, and refer to the service manual for specific procedures and specifications.
How do you tighten the chain on a 1987 Honda trx 250x quad?
on the rear axle housing, sprocket side, there should be a large spanner nut. Loosen the two bolts that tighten the rear axle in the housing and turn that spanner nut. Not sure which direction, you should be able to figure that out.
