0
IT'S PRETTY EASY. IT'S 2 BOLTS WITH LOCK NUTS ON THE TOP OF THE CARRIER, AND 2 NUTS ON THE SIDE WHERE THE BRAKE ROTOR IS. JUST LOOSEN THESE NUTS ON THE SIDE AND THE LOCK NUTS AND BOLTS ON THE TOP. SCREW THEM IN IT TIGHTENS OR LOOSEN THEM AND IT LOOSENS THE CHAIN. SOMETIMES I KICK THE BACK TIRES TO THE FRONT IT HELPS IF IT'S BEEN AWHILE SINCE YOU HAVE CHANGED THE POSITION.
What else can I help you with?
How do you adjust the chain on a 2000 Yamaha raptor 250cc?
To adjust the chain on a 2000 Yamaha Raptor 250cc, first, place the ATV on a level surface and elevate the rear end using a stand. Locate the chain adjusters on both sides of the swingarm, then loosen the axle nut using a wrench. Turn the adjuster bolts equally on both sides to achieve the desired chain tension, ensuring there's about 1-1.5 inches of slack. Finally, tighten the axle nut and double-check the tension before lowering the ATV.
How do you adjust cam chain on Yamaha sr125?
How to adjust timing chain Yamaha sr125
How do you change a raptor 350 chain?
To change the chain on a Raptor 350, first, elevate the ATV securely and remove the rear axle nut and wheel to access the chain. Use a chain breaker tool to remove the old chain, then thread the new chain through the sprockets, ensuring it is properly aligned. Adjust the tension using the chain adjusters on the swingarm, then reassemble the rear wheel and axle. Finally, check the chain's tension and alignment before taking the ATV for a test ride.
How can I adjust the tension of my bike chain?
To adjust the tension of your bike chain, first, loosen the bolts on the rear wheel. Then, move the wheel back or forth to adjust the chain tension. Make sure the chain is not too loose or too tight. Finally, tighten the bolts back securely.
How do you adjust the chain tension on a 2002 Yamaha ttr 125?
Loosen the axle nut and rotate the chain adjuster to the same position on both sides of the swingarm until you obtain the correct chain slack, then tighten the axle nut.
How can I properly adjust the fixed gear chain tension on my bicycle?
To properly adjust the fixed gear chain tension on your bicycle, you can loosen the rear wheel nuts, move the wheel back or forth to adjust tension, and then tighten the nuts securely. Check that the chain is straight and has proper tension for smooth riding.
How do you set timing on 2003 660 Yamaha raptor 660?
To set the timing on a 2003 Yamaha Raptor 660, first, remove the timing cover and ensure the engine is at top dead center (TDC) on the compression stroke. Align the timing marks on the crankshaft and camshaft; the mark on the camshaft should align with the mark on the cylinder head. Once aligned, check the tension on the timing chain and adjust if necessary. Finally, reassemble the timing cover, ensuring all components are secured properly.
How can I properly adjust the chain tension on my dirt jumper using a chain tensioner?
To properly adjust the chain tension on your dirt jumper using a chain tensioner, follow these steps: Loosen the bolts on the chain tensioner to allow for adjustment. Move the tensioner back or forth to adjust the tension on the chain. Ensure the chain is not too loose or too tight by checking the tension with your fingers. Once the desired tension is achieved, tighten the bolts on the chain tensioner to secure it in place. Test the chain tension by spinning the pedals to ensure smooth movement without any skipping or binding. Remember to regularly check and adjust the chain tension to maintain optimal performance and prevent damage to your bike.
How do you adjust drive chain on 85 Yamaha snowmobile?
get on ur kneese
How do you adjust a timing chain for a 1996 Yamaha quad 400 kodiak?
Timing chain diagram or how to set it
How can I adjust the chain tension on my bike?
To adjust the chain tension on your bike, first, locate the rear wheel axle nuts or quick-release lever. Loosen these to allow the wheel to move. Next, adjust the position of the rear wheel to tighten or loosen the chain tension. Once you have the desired tension, tighten the axle nuts or close the quick-release lever. Finally, check the chain tension by pushing down on the chain. It should move slightly up and down.
How do you adjust a cam chain on a virago 535?
To adjust the cam chain on a Yamaha Virago 535, first, remove the left side cover to access the cam chain tensioner. Loosen the tensioner locknut and turn the tensioner screw clockwise to increase tension, then retighten the locknut. Ensure the engine is at the correct timing mark, and check the tension by pulling on the chain; it should have minimal slack. Reassemble the side cover and ensure all bolts are secured.
