0
What else can I help you with?
How can you get your Craftsman tractor blades to engage?
Fix the drive belt.
Why does your craftsman riding lawn mower die when you engage the mowing blades?
check to be sure the blades have free movement. usually if you have this problem it is caused from something stopping the blades from rotating therefore it stops the engine
Why won't Craftsman lawn tractor blades engage?
Your switch may be bad or came disconnected. Or your PTO could have came unplugged, or it went bad.
While cutting grass with craftsman riding mower you stopped and wanted to go in different direction would engage?
You probably blew a belt.
Craftsman riding mower that shuts off when you put the blades up?
If you are saying that the mower shuts off when you engage the blades (or put the lever for the blades in the up position) then the most common problem is a bad seat safety switch. This is located under the seat. It has two wires going to it.
Why mower cuts off when blades engage?
why does my rider cut off when i engage the blades
Why will the blades not engage on L130 John Deere Riding Mower Blades Not work?
This has actually happened to me. There are some things you want to check.Make sure the blades are able to turn.Check your belts.Another problem might be with your PTO engage switch, these rarely burn out but the one on my tractor did.Check all things that engage the PTO, make sure all the lines and wires are connected and operational.My absolute best advice is to check with a dealer, but run over these things first so you don't go running to them with a simple problem.
How do you engage the mower blade on a gravely mower?
look for the engage switch that has a picture of blades
How do you engage the cutting blade on a john deere 165 hydro riding mower?
There's a yellow switch in the upper right hand portion of the dash. It's the PTO drive. Engage your clutch, pull up on the switch and move it forward, and that should start the blades spinning. If it fails to engage, it could be a bad switch or a bad battery.
What does live power on a tractor mean?
The term live power, or live power take-off, or just power take-off or PTO, is used to specify a feature of a piece of equipment like a tractor that has the ability to push or pull an aparatus, and also to separately drive the mechanical parts of the apparatus. In something like a brush cutter, the tractor pulls the cutting unit, and a separate drive shaft takes power from the tractor and transfers it to the cutter section to drive the cutter blades.
Craftsmn model 917.273639 rider mower will start and run until you release the brake clutch or engage the mower deck switch What part do I need to fix this problem?
There's a safety switch under the seat. It will shut the tractor off if you get off the machine while the blades are engaged. It's not sensing your weight thinking you have fallen off the tractor.
How do I drop the deck on my craftsman riding lawn mower?
The instructions to do that are in the operators manual if you have one. It is not too complicated and involves loosening some nuts on the linkage holding the mower up at the sides and at the front. If you mean just to lower the deck to mow at a certain level there should be a large lever mounted on the side of the mower with adjusting notches for setting the cutting height.
