To remove the seat from a Honda V65, first locate the seat release mechanism, which is typically found under the rear of the seat. You may need to unlock or unscrew a fastener, depending on the model year. Once the mechanism is disengaged, gently lift the rear of the seat upward and slide it backward to detach it from the hooks at the front. Ensure all cables or connections are safely disconnected if applicable.
At least for my 83 V65 the fuel pump rests directly beneath the seat and above the pivot for the rear swing arm. Access it from the top, remove the two bolts on either side from the top, disconnect the power, turn off the fuel petcock, and disconnect fuel lines to remove the pump.
Unlock the helmet lock, bump the seat toward the rear and lift it off. Putting it back on is the same only backwards, but make sure you get the hook under the front of the seat hooked under the crossmember on the frame. Push the seat down and forward, and lock the helmet lock.
The 2006 Honda CBF 250 seat is held in place by four retaining bolts. Remove the retaining bolts to remove the seat.
121
4
Remove the seat. Then pull out the black storage bow. You can access the tailight through the hole left.
how to remove front passenger seat of 1996 Honda Civic EX 2 door coupe
To remove the back seat from a 1997 Honda Odyssey the seat locks need to be opened. When the clips are unlocked the seat will be able to be lifted up and removed from the vehicle.
Remove two bolts at the rear of the seat, pull up and backwards.
1984 v65 sabre plug gap and NGK Spark PLug and heat range
Remove rear seat and panel underneath seat. How do I remove rear seat?!?!
Remove the bolts holding the seat on each side and then slide the seat back.