Remove the derby cover on the back end of the primary cover. Behind it you will find a spring and nut. Both slide off. Remove the nut behind that. You have to turn the screw inside it to get it out. remove the bolts from the primary cover and pull if off, AFTER you drain the oil. Once you are done, install the cover and put the first nut back on and turn the screw, just until it bottoms and then back out about 1/8 turn. Put the other nut back on and the spring. Put in your oil and install the cover.
remove the round derby cover from the primary. fill until the oil tries to run out. replace the cover.
through the clutch inspection cover. The Primary and transmission share fluid.
Yes, a battery cover for a 2006 Harley Nightster works perfectly for a 2006 Harley Sportster custom with a little fabrication.
There is a Hose with a Clip attached to the Left Side of the Frame underneath the Primary Cover. Remove the Clip and Pull the Drain Plug in the Hose..
how do you take primary cover off an 86 sportster
Yes, all Harley-Davidson Sportster models have a derby cover. The derby cover is a decorative and functional component that covers the primary drive system, allowing access to the primary chain and clutch for maintenance. It is typically located on the primary case and is an iconic feature of the Sportster design.
how do you stop oil leaking from a 2000 sportster primary cover
remove the derby ( round ) cover from the primary. fill til it tries to run out. replace derby cover.
Next to your battery you will see a triangle shaped cover with 3 screws in it, remove that to access wiring, fuses, etc.
through the clutch inspection cover
It is located on the RH side Crankshaft Cover.
locate and remove your primary oil drain plug, once the fluid is removed,remove the derby cover and replace the primary fluid to the approiate level