It is located on the RH side Crankshaft Cover.
at the dealer !
To test the ignition module on a 2003 Harley Softail, first disconnect the battery and remove the ignition module from the bike. Use a multimeter to check the resistance of the primary and secondary coils according to the service manual specifications. Additionally, inspect the wiring and connectors for any signs of damage or corrosion. If the module fails these tests, it may need to be replaced.
The 2003 Harley-Davidson 883 Sportster produces approximately 50 horsepower. This model is powered by an 883cc V-twin engine, which offers a balance of performance and classic styling. The Sportster is known for its lightweight and agile handling, making it a popular choice among riders.
A 2003 sportster has a chain drive for the promary, firm the engine to the transmission, and a belt drive final drive. The final drive is from the transmission to the rear wheel.
Yes it will. All seats are same fitment 1982 - 2003 model years.
Use an ohmeter to test tesistance where the plug wires connect to the coil-it should read 12,000. now for the the primaray side where the signal wires connect to the coil should be 2-3 ohms.
how many quart of transmission it need for 883xl sporter and what grade of oil is that.
1 quart of oil should do the trick
The recommended type of oil for a 2003 Harley Davidson Sportster 883 is 15 W 50. This oil can be purchased at any cycle shop and most auto parts stores.
where is the ignition control module located on mercury marquis
just behind the starter motor on a 1994 harley Davidson sportster is what looks like some sort of oil-outlet hose does anyone know where this hose is connected to
Follow the hose that goes to the frame from the oil tank. Loosen the clamp and pull.