Disconnect battery negative terminal, drain primary chaincase, remove outer chaincase cover, remove jackshaft end screw, disconnect positive terminal & solenoid terminal from starter, remove two allenhead starter mounting bolts, lift out starter.
To reinstall starter reverse procedure.
To remove the starter from a 1987 Harley Davidson Softail, first disconnect the negative battery cable to ensure safety. Then, remove any components obstructing access to the starter, like the exhaust or primary cover, if necessary. Next, disconnect the wires from the starter, noting their positions, and remove the mounting bolts securing the starter to the engine. Finally, carefully pull the starter out of its housing.
To remove a 1987 Harley Davidson starter motor, first disconnect the battery to prevent any electrical shorts. Then, locate the starter motor, usually mounted near the engine, and remove the bolts securing it to the engine. Disconnect the wiring harness and carefully pull the starter motor out of its mounting location. Finally, ensure all connections are clear and check for any debris before installation of a new starter, if necessary.
5000
You can use any SAE certified transmission fluid in your 1987 Harley-Davidson Sportster motorcycle. The manufacturer recommends that you never overfill the transmission fluid.
1987
1987
Heritage Harley Davidson is at 2595 Ogden Avenue, Lisle, Illinois 60532. Their phone number is (630) 420-1942. They opened in Lisle, Illinois in 1987.
It un-bolts from either side at the rear.
Remove the positive battery cable from your 1987 Chevrolet Blazer battery. Remove the starter cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
42 pilot 150 main for stock Keihin butterfly carb.
On a 1987 Harley-Davidson FLST (Heritage Softail), the circuit breaker is typically located under the seat, mounted to the frame. It's usually housed in a small plastic box or cover along with the electrical connections. To access it, you'll need to remove the seat and possibly the side panel for better visibility. Always refer to the owner's manual for specific details and diagrams related to your model.
The oil drain plug on a 1987 Harley Davidson Sportster is located on the bottom of the engine's oil pan, typically towards the rear of the bike. It is a hex or socket head bolt that can be accessed from beneath the motorcycle. Make sure to place a drain pan underneath to catch the oil when you remove the plug for an oil change. Always refer to the owner's manual for specific details and torque specifications.