To set the timing on a Yamaha 350 Warrior, first ensure the engine is at top dead center (TDC) on the compression stroke for cylinder one. Remove the left side cover to access the timing marks on the flywheel and the stator. Align the timing mark on the flywheel with the mark on the stator, adjusting the stator's position if necessary. Finally, securely tighten the stator bolts and reassemble the cover, ensuring everything is properly aligned.
You set cam timing on a Yamaha big bear 350 4x4, by opening up the bike chassis and looking for the cam timing levers. You can adjust it up or down until you have it set to how you want it.
Manual says align with the first T
A yamaha warrior does not have a timing. If it is backfiring like mine you have to get a diagnostics and something in the electrical system their is a switch that is turned off. IF you take it to a shop it will run you about 80-200 $$. I learned all this yesterday. Hope this helps. Antonio H
i need to find out how to set the timing on a Yamaha xt 500
how do i set the timing on a 1985 yamaha 200 3 wheeler
how to set ttr125 timing
To adjust the timing on a 1997 Yamaha Warrior YFM350, first, ensure the engine is at top dead center (TDC) on the compression stroke. Remove the timing cover to access the timing marks on the flywheel and the ignition timing plate. Loosen the bolts on the timing plate, rotate it to align the timing marks as needed, and then tighten the bolts securely. Finally, recheck the timing to ensure it is correctly set before reassembling the cover.
how do you set timing on a 1985 350 gmc truck
I need to know how to set the timing on a 650 Yamaha silverado 2002. Thank you
how do i set the timing for a chevy 350 small block?
how do you set the timing for a 1997 Chevy 350 5.7 engine
In order to set the timing on a 98 Chevy 350 vortex, you have to time with a scan tool that will let you set timing. Or let garage do it