0
The Mod 536-797570 Edger typically requires about 20 ounces of 2-cycle oil mixed with gasoline at a ratio of 50:1. It's important to check the user manual for any specific instructions or variations for your particular model. Always ensure you're using the correct type of oil for optimal performance.
What else can I help you with?
Where do you add oil to your 3.5 craftsman edger 53677210100?
I recommend adding it to the oil tank.
How much oil in a komodo lawn edger?
A Komodo lawn edger typically requires about 2.5 ounces of 2-cycle oil mixed with one gallon of gasoline. It's essential to check the specific model's user manual for exact oil requirements, as they can vary slightly. Always use the recommended oil type to ensure optimal performance and longevity of the equipment.
Where do you add oil to a Briggs and stratton edger?
front of engine block idiot
How much oil goes in a McLane 801-3.5RP edger?
The McLane 801-3.5RP edger typically requires about 20 ounces of 2-cycle engine oil mixed with gasoline. It's important to follow the manufacturer’s specifications for the correct oil-to-gas ratio, which is usually 50:1 for this model. Always consult the owner's manual for specific details and recommendations for optimal performance.
What kind of oil do i use for a 3.5 Briggs and stratton edger?
For a 3.5 Briggs and Stratton edger, it's recommended to use SAE 30 weight oil for warmer temperatures or 10W-30 for cooler conditions. Always check the owner's manual for specific oil recommendations, as it may provide guidance based on the edger's operating environment. Ensure to use high-quality oil that meets API service classifications for optimal performance.
Where is the 'oil plug' for changing oil on the 3.5 craftsman edger 536.772100?
The oil drain plug is located on the bottom of the engine underneath the edger. It takes 20 ounces of SAE30 weight oil. I recommend you use synthetic oil in any air cooled engine. Change the oil every 25 hours. Click the link to download an owners manual.
What is the gas-to-oil ratio for Briggs and stratton 3.5hp bolens edger?
Its a 4 cycle engine.......gasoline only
What gas to oil mixture for a 3.5 horsepower McLane edger with a Briggs and Stratton?
Do not know of a McLane that does not have the oil in the sump and the gas in the tank. In other words they do not normally mix together
I have an MTD Edger that calls for a gasoil mix. What kind of oil do I use Is it a 5050 mix?
not 5050, it's 50:1 mix
What damage will occur if you mixed oil and gas and poured them into your edger?
Mixing oil and gas in your edger can lead to engine damage, poor performance, and potential mechanical failure. The improper fuel mixture can cause excessive smoke, carbon buildup, and even clog the engine components. Additionally, it may result in difficulty starting the edger and could void any warranties or guarantees. It's crucial to use the correct fuel ratio specified by the manufacturer for optimal operation.
Craftsman Gas Edger 29cc 4 cycle what oil do you use?
I question your cc's, but a 30W of SG or greater rating should suffice.
What type of oil for Briggs and stratton 3.5hp for mclane edger?
If it is a 4 cycle engine use SAE 30 weight 100% synthetic.
