the clutch springs are not adjustable. proper tension is set when the springs are tightened all the way down. the bolts are 6mm w/10mm heads should torque to 90 to 110 inch lbs.
2 quarts
Sounds like clutch slip. Either the clutch springs need adjusting or the clutch plates are worn out.
figure out how to change master clutch cylinder and slave cylinder,then bleed the system properly
There is no adjustment for the starter clutch. If it isn't worknig properly you replace the rollers, springs and other parts as needed.
No, slipping is not affected by low hydraulic fluid level. The hydraulics of your clutch only DISENGAGE your clutch, they do not engage it. If it's slipping, it's either worn out, the pressure plate springs have weakened or you have oil on the clutch disk.
No, the Honda Civic springs is not compatible with any generation of the Honda Prelude.
Does a 1998 Honda prelude have a clutch cable
The 1986 Honda Prelude does not have a clutch cable. The 1986 Prelude has a hydraulic clutch instead of the clutch cable.
any information on 87 Honda accord with the clutch/
can we adjust the clutch on honda civic 1999
No it has an auto clutch.
No the clutch is hydraulic.