0
I will attach a link to an IPL that will show little. Let me say that tracing the lines is necessary. The one attached to the fuel filter enters the left side of the carb, the one exiting the right side attaches to the inlet of the purge and the other side of the puge dumps fuel back into the tank. The purge can be tested since it has one way valves by pushing in the bulb and sealing a connector with a finger. The connector that does not allow the bulb to come back out when sealed is the inlet. The exit blows air out when the bulb is pushed.
What else can I help you with?
What is the routing for the fuel lines on a Poulan 3400 chainsaw?
Fairly simple. Fuel line up from tank.....underneath carb.....to right side of carb inlet fitting.
Why does your poulan pro chainsaw keep flooding out?
A Poulan Pro chainsaw may keep flooding out due to issues such as a clogged carburetor, a faulty fuel line, or a malfunctioning primer bulb. When these components are not operating correctly, excess fuel can enter the engine and cause flooding. Regular maintenance and cleaning of these parts can help prevent the chainsaw from flooding out.
Poulan 2150 chainsaw just stopped running and I can't get it started again?
Try changing your fuel filter/lines. It could have had sucked something into the lines and cannot get any more fuel through.
Show diagram of poulan chain saw fuel lines?
show diagram of poulan chain fuel lines
What is the routing for the fuel lines on a Poulan 2050 pioneer chainsaw?
There are two lines inside the tank. The short line with no fuel filter on the end of it goes to the inlet, (suction) side of the primer bulb. The long line inside the tank, with the filter on the end goes directly to the fitting on the side of the carburetor. The line, inside the air box from the outlet side of the primer goes to the remaining fuel line fitting on the carburetor. http://store.chainsawr.com/
What is the routing for the fuel lines on a poulan 2050 wild thing chainsaw?
There are two lines inside the tank. The short line with no fuel filter on the end of it goes to the inlet, (suction) side of the primer bulb. The long line inside the tank, with the filter on the end goes directly to the fitting on the side of the carburetor. The line, inside the air box from the outlet side of the primer goes to the remaining fuel line fitting on the carburetor. http://store.chainsawr.com/
Need a full diagram for fuel line routing for a poulan 2150 chainsaw?
There are two lines inside the tank. The short line with no fuel filter on the end of it goes to the inlet, (suction) side of the primer bulb. The long line inside the tank, with the filter on the end goes directly to the fitting on the side of the carburetor. The line, inside the air box from the outlet side of the primer goes to the remaining fuel line fitting on the carburetor. http://store.chainsawr.com/
What is the fuel line routing on a poulan 2375?
The small line from the tank (with the fuel filter) goes to the top port of the carburetor. The large line from the fuel tank goes to the center port of the primer bulb. The other port of the primer bulb goes to the bottom port of the carburetor.
What is the gas mixture for Poulan pro 305 chainsaw?
The Poulan Pro 305 chainsaw typically requires a gas mixture of 40:1, meaning 3.2 ounces of two-cycle engine oil mixed with one gallon of unleaded gasoline. It's important to use a high-quality two-stroke oil designed for air-cooled engines to ensure optimal performance. Always refer to the owner's manual for specific recommendations and to verify the correct fuel mixture for your model.
How do you replace poulan chainsaw fuel line?
I'm having the same problem with my Poulan chainsaw and weed eater. I think the line starts with the fuel filter in the tank and travels up to the primer bulb, out of the bulb into the carburetor, and out of the carburetor back to the tank. Whatever the size of line is that hooks to the fuel filter is what will hook to the primer bulb and then the carburetor. Then one more single line returns to the tank. I may not be correct on this, but there's not much information available. The diagram on Poulan's website does not show the routing of the fuel lines. that is right but to remove the main line you need to drain fuel and pull the line out from the fuel tank neck first because it has a connection that will not fit threw the hole in top. to replace it cut new line at a slaint and fir it threw from the top down into the fuel tank. then keep it long and pull out enough threw the fuel cap to put fitting back on it and fuel filter then pull it back threw and hook it to primer bubble. Not sure about your answer I have two different size fuel lines on mine. The larger line if I remember correctly runs from primer bulb to the right of fuel tank where the larger opening is located. The smaller line is where I am confused at shouldn't the smaller line from the fuel tank that has in tank filter attached run up to carburetor. then a smaller line from primer bulb to second fitting on carb. byrumjr the line starts with the fuel filter in the tank and travels up to the carburetor out of the carburetor into the primer bulb, out of the primer bulb back in the tank
Need correct routing of fuel lines on McCulloch 3200 series chainsaw?
To correctly route the fuel lines on a McCulloch 3200 series chainsaw, ensure the line from the fuel tank goes to the carburetor's inlet. The larger line typically goes from the tank to the carburetor, while the smaller line connects the carburetor to the fuel tank vent. Additionally, make sure the fuel filter is submerged in the fuel tank. Always consult the specific model's manual for detailed diagrams and instructions.
How does one get to the gas tank to replace the fuel line to the bulb for my Poulan 2150 chainsaw?
You have to reach in through the fuel filler hole, either using needle nose pliers, forceps, or a bent piece of wire to pull the fuel line through. There is no easier access. If you remove the air filter you will have a little more room to work at it from the other end too. http://store.chainsawr.com/
