Depends how long it ran for, but if it ran for 5 minutes or more, the engine will fail due to the aluminum piston melting/overheating and damaging the cylinder bore
What can happen when a blower motor resistor goes bad is that the motor will run and then suddenly stop running on a regular basis. Sometimes the blower fan will not turn on and cause the motor to overheat.
The blower motor is located on the passenger side of the vehicle under the instrument panel. The blower motor can be removed without having to remove the instrument panel or the HVAC housing.Disconnect and isolate the negative battery cable.Disconnect the wire harness connector from the blower motor .Release the locking tab that secures the blower motor to the HVAC housing and rotate blower motor counterclockwise.Rotate and tilt the blower motor as needed for clearance to remove the blower motor and wheel from the HVAC housing.
When that happens on a Chrysler Town and Country with auto temperature, the blower motor power module has failed. It is also called a blower motor resistor.
probablly a bad ignition switch or blower motor not sure on that should run without power
# Disconnect and isolate the negative battery cable. # Disconnect the wire harness connector from the blower motor . # Release the locking tab that secures the blower motor to the HVAC housing and rotate blower motor counterclockwise. # Rotate and tilt the blower motor as needed for clearance to remove the blower motor and wheel from the HVAC housing. also The blower motor is located on the passenger side of the vehicle under the instrument panel. The blower motor can be removed without having to remove the instrument panel or the HVAC housing.
Blower motor fuse is blown. Blower motor resistor burned out. Blower motor switch bad. Blower motor bad.
Blower motor: remove the glove box and you will see the blower motor and blower resistor.
usually the blower motor resistor pkg. located on or near the blower motor
It's close to the blower motor.
If you are saying the blower motor will not work, then check the fuse. If the fuse is not blown, then it is possibly a defective Blower Motor Resistor Pack, blower motor, or blower motor speed control switch, in that order.If you are saying the blower motor will not work, then check the fuse. If the fuse is not blown, then it is possibly a defective Blower Motor Resistor Pack, blower motor, or blower motor speed control switch, in that order.
Check blower motor fuse Check to see if blower motor is getting power
The blower motor fuse protects the blower motor electrical circuit. The blower motor relay operates only the high speed function of the blower motor. The blower motor speed resistor operates the lower speed functions of the blower motor.